- Overall Length: 30.22 ft / 9210 mm
- Width Over Tires: 9.26 ft / 2820 mm
- Wheelbase: 21.2 ft / 6460 mm
- Blade Base: 9.39 ft / 2860 mm
Published dimensions and weight
Caterpillar 14H ES
The Caterpillar 14H ES is a motor grader powered by a 215 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total41411.7 lb18784 kg
03Selected published values30
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Caterpillar 14H ES include published moldboard width of 14.1 ft / 4270 mm, published maximum power of 215 hp / 160.4 kw, published operating weight of 41411.7 lb / 18784 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (30.22 ft / 9210 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (9.26 ft / 2820 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (21.2 ft / 6460 mm) with the specific machine's configuration and records; options and condition can differ.
What changes with this option
Compared with the base Caterpillar 14H: 17 of 27 published specifications change.
| Section | Specification | Caterpillar 14H | Caterpillar 14H ES |
|---|---|---|---|
| Dimensions | Overall Length | 30.64 ft / 9342 mm | 30.22 ft / 9210 mm |
| Dimensions | Width Over Tires | 9.25 ft / 2817 mm | 9.26 ft / 2820 mm |
| Dimensions | Wheelbase | 21.19 ft / 6460 mm | 21.2 ft / 6460 mm |
| Dimensions | Blade Base | 9.42 ft / 2860 mm | 9.39 ft / 2860 mm |
| Dimensions | Height To Top Of Isomount Cab | 10.96 ft / 3339 mm | 10.96 ft / 3340 mm |
| Engine | Engine Model | 3176 ATAAC / 3176 ATAAC | 3306 DITA / 3306 DITA |
| Engine | Max Power | 240 hp / 179 kw | 215 hp / 160.4 kw |
| Engine | Net Power Gears 7-8 | 240 hp / 179 kw | 215 hp / 160.4 kw |
| Engine | Displacement | 629 cu in / 10.3 L | 637.7 cu in / 10.5 L |
| Operational | Hydraulic System Fluid Capacity | 32.5 gal / 125 L | 33.1 gal / 125 L |
| Operational | Std Operation Weight - Total | 41465 lb / 18809 kg | 41411.7 lb / 18784 kg |
| Operational | Fuel Capacity | 110 gal / 416 L | 100.2 gal / 379 L |
| Steering | Turning Radius | 25.9 ft / 7.9 m | 26 ft / 7.9 m |
| Moldboard | Moldboard Width | 14 ft / 4267 mm | 14.1 ft / 4270 mm |
| Hydraulic System | Pump Type | axial piston / axial piston | Axial Piston / Axial Piston |
| Hydraulic System | Pump Flow | 64.1 gal/min / 243 L/min | 64.2 gal/min / 243 L/min |
| Hydraulic System | Relief Valve Pressure | 3500 psi / 24150 kPa | 3500 psi / 24131.7 kPa |
Published only for this option
| Section | Specification | Imperial | Metric |
|---|---|---|---|
| Operational | Tire Size | 16-24 12PR (G-2) | 16-24 12PR (G-2) |
| Operational | Operating Voltage | 24 V | 24 V |
| Operational | Alternator Supplied Amperage | 50 amps | 50 amps |
Not published for this option: Rear Ground Clearance, Tandem Axle Wheelbase, Front Ground Clearance, Number Of Cylinders, Net Power Gear 4-6, Net Power Gear 1-2, Power Measured @, Net Power Gear 5-6, Std Operation Weight - Front Axle, Std Operation Weight - Rear Axle, Max Operation Weight - Front Axle, Max Operation Weight - Rear Axle, Max Operation Weight - Total, Cooling System Fluid Capacity, Transmission Fluid Capacity, Circle Gearbox Fluid Capacity, Tandem Case Fluid Capacity (Each), Transmission Type, Ground Clearance, Max Depth Of Cut, Side Shift Left, Side Shift Right, Blade Pull At Max Weight, Blade Down Pressure, Diameter, Shift Left, Shift Right, Max Reach Outside Tires - Left, Max Reach Outside Tires - Right, Max Lift Above Ground, Blade Tip Angle - Front, Blade Tip Angle - Rear
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.