- Overall Length: 30.64 ft / 9342 mm
- Width Over Tires: 9.25 ft / 2817 mm
- Wheelbase: 21.19 ft / 6460 mm
- Rear Ground Clearance: 1.25 ft / 378 mm
Published dimensions and weight
Caterpillar 14H
Rated at 240 hp, the Caterpillar 14H is a motor grader.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total41465 lb18809 kg
03Selected published values59
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Caterpillar 14H include published moldboard width of 14 ft / 4267 mm, published maximum power of 240 hp / 179 kw, published operating weight of 41465 lb / 18809 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (30.64 ft / 9342 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (9.25 ft / 2817 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (21.19 ft / 6460 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length30.64 ft9342 mm
Width Over Tires9.25 ft2817 mm
Wheelbase21.19 ft6460 mm
Rear Ground Clearance1.25 ft378 mm
Tandem Axle Wheelbase5.42 ft1656 mm
Front Ground Clearance2.12 ft645 mm
Blade Base9.42 ft2860 mm
Height To Top Of Isomount Cab10.96 ft3339 mm
Engine
Number Of Cylinders66
Net Power Gear 4-6240 hp179 kw
Engine Make22362236
Engine Model3176 ATAAC3176 ATAAC
Net Power Gear 1-2220 hp164 kw
Power Measured @2000 rpm2000 rpm
Net Power Gear 5-6240 hp179 kw
Max Power240 hp179 kw
Net Power Gears 7-8240 hp179 kw
Displacement629 cu in10.3 L
Operational
Std Operation Weight - Front Axle11695 lb5305 kg
Hydraulic System Fluid Capacity32.5 gal125 L
Std Operation Weight - Rear Axle29770 lb13504 kg
Std Operation Weight - Total41465 lb18809 kg
Max Operation Weight - Front Axle19425 lb8811 kg
Max Operation Weight - Rear Axle39084 lb17729 kg
Max Operation Weight - Total58509 lb26540 kg
Fuel Capacity110 gal416 L
Cooling System Fluid Capacity12.8 gal48.3 L
Transmission Fluid Capacity21.6 gal83 L
Circle Gearbox Fluid Capacity1.6 gal6 L
Tandem Case Fluid Capacity (Each)25.5 gal98 L
Steering
Articulation Angle20 degrees20 degrees
Turning Radius25.9 ft7.9 m
Transmission
Transmission Typedirect drive, power shift, planetarydirect drive, power shift, planetary
Number Of Gears - Forward88
Number Of Gears - Reverse88
Max Speed - Forward26.6 mph42.7 km/h
Max Speed - Reverse29.4 mph47.3 km/h
Front Axle
Wheel Lean18 degrees18 degrees
Oscillation - Total32 degrees32 degrees
Ground Clearance2.2 ft645 mm
Moldboard
Moldboard Width14 ft4267 mm
Moldboard Height27.1 in686 mm
Moldboard Thickness1 in25 mm
Max Depth Of Cut17.3 in438 mm
Side Shift Left25.6 in650 mm
Side Shift Right31.1 in790 mm
Blade Pull At Max Weight52659.7 lb23886 kg
Blade Down Pressure34517.8 lb15657 kg
Hydraulic System
Pump Typeaxial pistonaxial piston
Pump Flow64.1 gal/min243 L/min
Relief Valve Pressure3500 psi24150 kPa
Circle
Diameter71.8 in1822 mm
Shift Left25.5 in650 mm
Shift Right20.5 in520 mm
Max Reach Outside Tires - Left81 in2057 mm
Max Reach Outside Tires - Right82 in2082 mm
Max Lift Above Ground16.5 in419 mm
Blade Tip Angle - Front40 degrees40 degrees
Blade Tip Angle - Rear5 degrees5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.