- Length W/ Bucket On Ground: 24.94 ft / 7601 mm
- Width Over Tires: 8.44 ft / 2570 mm
- Height To Top Of Cab: 10.76 ft / 3278 mm
- Wheelbase: 9.52 ft / 2900 m
Published dimensions and weight
Caterpillar 930H
The Caterpillar 930H is an integrated tool carrier of about 13 t, powered by a 150 hp engine.
01Published dimensions and weight
Dimensions reference
Representative category illustration; exact model may differ.Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight28725 lb13029.5 kg
03Selected published values41
Integrated tool carriers are commonly used for loading and material handling with interchangeable front attachments. Published rows for Caterpillar 930H include published bucket capacity of 3 yd3 / 2.3 m3, published breakout force of 28334 lb / 126.1 kN, published operating weight of 28725 lb / 13029.5 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Length W/ Bucket On Ground” field (24.94 ft / 7601 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.44 ft / 2570 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Height To Top Of Cab” field (10.76 ft / 3278 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Length W/ Bucket On Ground24.94 ft7601 mm
Width Over Tires8.44 ft2570 mm
Height To Top Of Cab10.76 ft3278 mm
Wheelbase9.52 ft2900 m
Ground Clearance1.35 ft411 mm
Hinge Pin Max Height13.25 ft4049 mm
Dump Clearance At Max Lift9.3 ft2833 mm
Max Lift Height12.76 ft3889 mm
Fork Tine Length4 ft1219.2 mm
Reach At Max Height And Dump3.07 ft934 mm
Length With Out Forks On Ground25.77 ft7854 mm
Engine
Engine Make22362236
Engine ModelC6.6C6.6
Net Power150 hp111.9 kw
Max Torque547 lb ft741.7 Nm
Displacement403 cu in6.7 L
Operational
Operating Weight28725 lb13029.5 kg
Fuel Capacity59.5 gal225 L
Cooling System Fluid Capacity10.6 gal40 L
Engine Oil Capacity4 gal15 L
Transmission Fluid Capacity9.2 gal34.5 L
Front Diff Fluid Capacity6.9 gal26 L
Rear Diff Fluid Capacity6.7 gal25 L
Hydraulic System Fluid Capacity39.1 gal148 L
Turning Radius17.3 ft5257 mm
Static Tipping Load - Bucket19933 lb9041.5 kg
Static Tipping Load - Forks15977 lb7247.1 kg
Tire Size20.5R25 L3 XHA20.5R25 L3 XHA
Transmission
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed Forward23.8 mph38.4 km/h
Max Speed Reverse15 mph24.2 km/h
Hydraulic System
Relief Valve Setting3755 psi25889.8 kPa
Pump Flow Capacity58 gal/min220 L/min
Raise Time5 sec5 sec
Dump Time1.7 sec1.7 sec
Lower Time2.8 sec2.8 sec
Bucket
Breakout Force28334 lb126.1 kN
Bucket Capacity - Heaped3 yd32.3 m3
Bucket Capacity - Struck2.5 yd31.9 m3
Blade
Width8.4 ft2550 mm
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.