- Length W/ Bucket On Ground: 24.28 ft / 7399 mm
- Width Over Tires: 8.06 ft / 2455 mm
- Height To Top Of Cab: 10.76 ft / 3278 mm
- Wheelbase: 9.52 ft / 2900 m
Published dimensions and weight
Caterpillar 930G
Weighing roughly 12.7 t and rated at 150.2 hp, the Caterpillar 930G is an integrated tool carrier in its size class.
01Published dimensions and weight
Dimensions reference
Representative category illustration; exact model may differ.Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight27963.5 lb12684 kg
03Selected published values129
Integrated tool carriers are commonly used for loading and material handling with interchangeable front attachments. Published rows for Caterpillar 930G include published bucket capacity of 2.8 yd3 / 2.1 m3, published breakout force of 30349.3 lb / 135 kN, published operating weight of 27963.5 lb / 12684 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Length W/ Bucket On Ground” field (24.28 ft / 7399 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.06 ft / 2455 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Height To Top Of Cab” field (10.76 ft / 3278 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Length W/ Bucket On Ground24.28 ft7399 mm
Width Over Tires8.06 ft2455 mm
Height To Top Of Cab10.76 ft3278 mm
Wheelbase9.52 ft2900 m
Ground Clearance1.2 ft365.76 mm
Hinge Pin Max Height13.29 ft4049 mm
Dump Clearance At Max Lift9.6 ft2926 mm
Max Lift Height12.76 ft3889 mm
Fork Tine Length3.94 ft1200 mm
Hook Height At Max Lift - Standard22.44 ft6837 mm
Hook Height At Max Lift - Extended25.39 ft7736 mm
Hook Reach At Max Lift - Standard7.3 ft2225 mm
Hook Reach At Max Lift - Extended5.87 ft1788 mm
Height - Top Of Rops/Fops10.5 ft3.21 m
Height - Top Of Hood85.2 in2164.08 mm
Height - Top Of Exhaust Stack10.4 ft3.17 m
Height - Center Of Axle2.1 ft0.65 m
Dump Clearance At Maximum Lift - 45 Degrees9.1 ft2.78 m
Bucket Clearance-Maximum Lift/Carry11.5 ft3.51 m
Dump Angle At Maximum Lift45 degrees45 degrees
Length - Rear Axle To Bumper6.4 ft1.96 m
Digging Depth5 in127 mm
Length With Out Forks On Ground25.14 ft7662 mm
Centerline Of Front Axle To Hitch4.7 ft1.44 m
Overall Height16.9 ft5151.12 mm
Overall Height - Bucket Raised16.9 ft5.16 m
Overall Length23.6 ft7193.28 mm
Rack Back Angle - Carry51 degrees51 degrees
Rack Back Angle - Ground50 degrees50 degrees
Rack Back Angle - Maximum Lift58 degrees58 degrees
Reach At Max Height And Dump3.55 ft1082 mm
Reach At Maximum Lift And 45 Degrees Dump3.6 ft1.1 m
Wheel Base9.2 ft2.81 m
Wheel Base Length9.2 ft2.81 m
Carry Height1.2 ft0.37 m
Width - Over Tires8 ft2.44 m
Bucket Pin Height - Maximum Lift12.6 ft3.85 m
Engine
Engine Make22362236
Engine Model366 in366 in
Gross Power161 hp120 kw
Net Power150.2 hp112 kw
Displacement366.2 cu in6 L
Bore4 in100.1 mm
Stroke5 in127 mm
Rated Net Power149 hp111.2 kw
Sae J1349 (2)159 hp118.6 kw
Iso 9249 (1997) (2)161 hp120.1 kw
Eec 80/1269 (2)161 hp120.1 kw
Sae J1349 (1)149 hp111.2 kw
Iso 9249 (1997) (1)150 hp111.9 kw
Eec 80/1269 (1)150 hp111.9 kw
Maximum Net Power - 2000 Rpm159 hp118.6 kw
Operational
Operating Weight27963.5 lb12684 kg
Fuel Capacity59.5 gal225 L
Cooling System Fluid Capacity10.6 gal40 L
Engine Oil Capacity4.3 gal16 L
Transmission Fluid Capacity9.2 gal34.5 L
Front Diff Fluid Capacity6.9 gal26 L
Rear Diff Fluid Capacity6.7 gal25 L
Hydraulic System Fluid Capacity33.1 gal125 L
Turning Radius17.3 ft5257 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Static Tipping Load - Bucket20833.7 lb9450 kg
Static Tipping Load - Forks15943.9 lb7232 kg
Static Tipping Load - Material Handler8212.3 lb3725 kg
Tire Size20.5R2520.5R25
Transmission
Transmission Typecountershaftcountershaft
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed Forward23.7 mph38 km/h
Max Speed Reverse15.6 mph25 km/h
Forward - 14.5 mph7.3 km/h
Reverse - 14.5 mph7.3 km/h
27.6 mph12.3 km/h
315 mph24.2 km/h
423.8 mph38.4 km/h
Steering
Steering Angle - Each Direction40 degrees40 degrees
Minimum Turning Radius - Over Tires207 in5257.8 mm
Steering Cylinder, Two, Bore2.8 in69.9 mm
Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi)17.6 gal/min17.6 gal/min
Maximum Working Pressure3500 psi3500 psi
Steering Articulation40 degrees40 degrees
Weights
Operating Weight28725 lb13029.5 kg
Optional Counterweight1036.2 lb470 kg
Maximum Weight29044 lb13174.2 kg
Tires
Tread Width7.9 ft2.5 m
Size17.5-25 12PR L-217.5-25 12PR L-2
Buckets
Bucket Capacities2.1 m3 - 5.0 m3 2.6 yd3 - 6.5 yd32.1 m3 - 5.0 m3 2.6 yd3 - 6.5 yd3
Bucket Width8.4 ft2.6 m
Hydraulic System
Pump Typevariable-displacement axial pistonvariable-displacement axial piston
Relief Valve Setting3756.5 psi25900 kPa
Pump Flow Capacity58.2 gal/min220 L/min
Raise Time5 sec5 sec
Dump Time1.7 sec1.7 sec
Lower Time2.8 sec2.8 sec
Bucket
Breakout Force30349.3 lb135 kN
Bucket Capacity - Heaped2.8 yd32.1 m3
Bucket Capacity - Struck2.3 yd31.7 m3
Blade
Width8.4 ft2550 mm
Axles
Axle Oscillation11 degrees11 degrees
Operating Specifications
Static Tipping Load - Full Turn18029 lb8177.9 kg
Dump Clearance9.3 ft2.9 m
Articulation Angle40 degrees40 degrees
Reach - Full Lift And 45 Degrees Dump3.6 ft1.1 m
Dump Clearance At Full Lift And 45 Degrees Dump Angle9.7 ft3 m
Service Refill Capacities
Cooling System10.6 gal40.2 L
Fuel Tank59.4 gal224.9 L
Crankcase4.2 gal15.9 L
Hydraulic Tank18.5 gal70.1 L
Hydraulic System - Including Tank33 gal125 L
Transmission9.1 gal34.5 L
Front6.9 gal26.2 L
Rear6.6 gal25 L
Cab
RopsSAE J1040 MAY94, ISO 3471-1994SAE J1040 MAY94, ISO 3471-1994
FopsSAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level IISAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II
Loader Hydraulic System
Pump Flow - Implement Pump58 gal/min58 gal/min
Output At 2,300 Engine Rpm And 6900 Kpa (1000 Psi) With Sae 10w Oil At 65 Degreesc (150 Degreesf)58 gal/min58 gal/min
Maximum Working Pressure3755 psi3755 psi
Raise5 s5 s
Dump1.7 s1.7 s
Lower, Empty, Float Down2.8 s2.8 s
Total9.5 s9.5 s
Bore (1)4.5 in114.3 mm
Stroke (1)30.6 in777.3 mm
Bore (2)6 in152.4 mm
Stroke (2)37 in939.8 mm
Hydraulic Cycle Time9.5sec9.5sec
Relief Pressure - Implement Pump3755 psi3755 psi
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.