- Transport Width: 18.7 ft / 5.7 m
- Transport Height: 14.75 ft / 4495.8 mm
- Number Of Row Units 7.5" Spacing: 96
- Road-To-Opener Clearance,: 8.5 in / 21.59 cm
Published dimensions and weight
New Holland P2080 - 60 ft
The New Holland P2080 - 60 ft is an air drill; its full manufacturer specification sheet appears below.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02WeightNot publishedNot published
03Selected published values39
Air drills are commonly used to meter and place seed, and sometimes fertilizer, across broad agricultural fields. Published rows for New Holland P2080 - 60 ft include published transport width of 18.7 ft / 5.7 m, the published “Transport Height” field of 14.75 ft / 4495.8 mm, the published “Number Of Row Units 7.5" Spacing” field of 96. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Transport Width” field (18.7 ft / 5.7 m) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Transport Height” field (14.75 ft / 4495.8 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Number Of Row Units 7.5" Spacing” field (96) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Transport Width18.7 ft5.7 m
Transport Height14.75 ft4495.8 mm
Number Of Row Units 7.5" Spacing9696
Road-To-Opener Clearance,8.5 in21.59 cm
Available Spacing10 in25.4 cm
Toolbar Width60 ft18.29 m
Split Rank Capability15 in38.1 cm
Number Of Row Units 10" Spacing7272
Engine
Fold TypeDoubleDouble
Wing Sections55
Operating Speed8 mph12.9 km/h
Ground Following DesignParallel linkParallel link
Tow Between/Behind Air Cart Capacity, Bushels280 to 580 (9867 to 20439) L280 to 580 (9867 to 20439) L
Display SystemIntelliview IV or ISO11783 compliant displayIntelliview IV or ISO11783 compliant display
Sectional Control1/2 width - optional DIA on Air Cart1/2 width - optional DIA on Air Cart
Blockage MonitoringOptionalOptional
Row Unit Travel From Level Surface Down8.5 in21.6 cm
Row Unit Travel From Level Surface Up11.5 in29.3 cm
Wing Flex Up15 degrees15 degrees
Wing Flex Down10 degrees10 degrees
Disks18 in45.8 cm
Depth Settings14 position T-handle adjust from 0 to 3.5 (8.9)14 position T-handle adjust from 0 to 3.5 (8.9)
Down Pressure AdjustmentVariable springVariable spring
Weights
Weight 7.5 " Spacing (Empty)45000.8 lb20412 kg
Weight 10 " Spacing (Empty)40999.4 lb18597 kg
Closing Wheel Variable Packing Pressure, Lbs85 lb38.6 kg
Standard In-Cab Down Pressure Control1400 lb635.1 kg
Tires
Tires Total20 Standard and 24 optional20 Standard and 24 optional
Center Section Walking Beam Castor Tires16.5 x 16.1 E16.5 x 16.1 E
Rear Mainframe Dual Walking Beam Tire Size16.5 x 16.1 E16.5 x 16.1 E
Inner And Outer Wings Walking Beam Castor Tire Size12.5L x1512.5L x15
Hydraulic System
Hydraulic Requirements30.2 gal/min114 L/min
Hydraulic SystemIn cab down pressure adjust standardIn cab down pressure adjust standard
3-Point Hitch
Length With Rear Hitch (Pin To Pin)38.6 ft11.8 m
Minimum Tractor Pto Hp Required 7.5" Spacing364.8364.8
Minimum Tractor Pto Hp Required 10 Spacing273.6273.6
Minimum Tractor Pto Hp Required 7.5 Spacing With Air Cart430 to 465430 to 465
Minimum Tractor Pto Hp Required 10 Spacing With Air Cart339 to 374339 to 374
Hitch TypeFloatingFloating
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.