- Transport Width: 12 ft / 3.66 m
- Transport Height: 13 ft / 3962.4 mm
- Number Of Row Units 7.5" Spacing: 48
- Road-To-Opener Clearance,: 8.5 in / 21.59 cm
Published dimensions and weight
New Holland P2080 - 30 ft
The New Holland P2080 - 30 ft is an air drill; its full manufacturer specification sheet appears below.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02WeightNot publishedNot published
03Selected published values39
Air drills are commonly used to meter and place seed, and sometimes fertilizer, across broad agricultural fields. Published rows for New Holland P2080 - 30 ft include published transport width of 12 ft / 3.66 m, the published “Transport Height” field of 13 ft / 3962.4 mm, the published “Number Of Row Units 7.5" Spacing” field of 48. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Transport Width” field (12 ft / 3.66 m) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Transport Height” field (13 ft / 3962.4 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Number Of Row Units 7.5" Spacing” field (48) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Transport Width12 ft3.66 m
Transport Height13 ft3962.4 mm
Number Of Row Units 7.5" Spacing4848
Road-To-Opener Clearance,8.5 in21.59 cm
Available Spacing10 in25.4 cm
Toolbar Width30 ft9.15 m
Split Rank Capability20 in50.8 cm
Number Of Row Units 10" Spacing3636
Engine
Fold TypeSingleSingle
Wing Sections33
Operating Speed8 mph12.9 km/h
Ground Following DesignParallel linkParallel link
Tow Between/Behind Air Cart Capacity, Bushels280 to 430 (9867 to 15153) L280 to 430 (9867 to 15153) L
Display SystemIntelliview IV or ISO11783 compliant displayIntelliview IV or ISO11783 compliant display
Sectional Control1/2 width - optional DIA on Air Cart1/2 width - optional DIA on Air Cart
Blockage MonitoringOptionalOptional
Row Unit Travel From Level Surface Down8.5 in21.6 cm
Row Unit Travel From Level Surface Up11.5 in29.3 cm
Wing Flex Up15 degrees15 degrees
Wing Flex Down10 degrees10 degrees
Disks18 in45.8 cm
Depth Settings14 position T-handle adjust from 0 to 3.5 (8.9)14 position T-handle adjust from 0 to 3.5 (8.9)
Down Pressure AdjustmentVariable springVariable spring
Weights
Weight 7.5 " Spacing (Empty)19621.2 lb8900 kg
Weight 10 " Spacing (Empty)17416.6 lb7900 kg
Closing Wheel Variable Packing Pressure, Lbs85 lb38.6 kg
Standard In-Cab Down Pressure Control1400 lb635.1 kg
Tires
Tires Total12 Standard and 16 optional12 Standard and 16 optional
Center Section Walking Beam Castor Tires12.5L x1512.5L x15
Rear Mainframe Dual Walking Beam Tire Size18L x 16.118L x 16.1
Inner And Outer Wings Walking Beam Castor Tire Size12.5L x1512.5L x15
Hydraulic System
Hydraulic Requirements30.2 gal/min114 L/min
Hydraulic SystemIn cab down pressure adjust standardIn cab down pressure adjust standard
3-Point Hitch
Length With Rear Hitch (Pin To Pin)36.4 ft11.1 m
Minimum Tractor Pto Hp Required 7.5" Spacing195195
Minimum Tractor Pto Hp Required 10 Spacing145145
Minimum Tractor Pto Hp Required 7.5 Spacing With Air Cart260 to 295260 to 295
Minimum Tractor Pto Hp Required 10 Spacing With Air Cart210 to 245210 to 245
Hitch TypeFloatingFloating
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.