- Dump Clearance At Max Raise: 8.37 ft / 2550 mm
- Bucket Width: 6.07 ft / 1850 mm
- Bucket Capacity - Heaped: 1.05 yd3 / 0.81 m3
- Ground Clearance: 1.43 ft / 435 mm
Published dimensions and weight
Yanmar V8
The Yanmar V8 is a wheel loader of about 4.9 t, built around the TCD 2.9 L4 engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight10802.7 lb4900 kg
03Selected published values30
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Yanmar V8 include published bucket capacity of 1.05 yd3 / 0.81 m3, published operating weight of 10802.7 lb / 4900 kg, published engine power of 60 hp / 44.8 kw. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.37 ft / 2550 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (6.07 ft / 1850 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.05 yd3 / 0.81 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.37 ft2550 mm
Bucket Width6.07 ft1850 mm
Bucket Capacity - Heaped1.05 yd30.81 m3
Dimensions
Ground Clearance1.43 ft435 mm
Length With Bucket On Ground16.61 ft5060 mm
Width Over Tires5.84 ft1780 mm
Height To Top Of Cab8.67 ft2640 mm
Wheelbase6.89 ft2100 mm
Hinge Pin - Max Height10.5 ft3200 mm
Reach At Max Lift And Dump2.3 ft700 mm
Engine
Number Of Cylinders44
Engine MakeDeutzDeutz
Engine ModelTCD 2.9 L4TCD 2.9 L4
Net Power60 hp44.8 kw
Power Measured @2200 rpm2200 rpm
Max Torque240 Nm240 Nm
Displacement177 cu in3 L
Torque Measured @1600 rpm1600 rpm
Operational
Operating Weight10802.7 lb4900 kg
Fuel Capacity20 gal75.8 L
Hydraulic System Fluid Capacity15 gal56.8 L
Static Tipping Weight8311.5 lb3770 kg
Turning Radius13.7 ft4160 mm
Operating Voltage12 V12 V
Rear Axle Oscillation8 degrees8 degrees
Tire Size405/70 R 18 SPT 9 Dunlop405/70 R 18 SPT 9 Dunlop
Transmission
Transmission TypeHydrostaticHydrostatic
Max Speed - Forward22.4 mph36 km/h
Hydraulic System
Relief Valve Setting3000 psi20684.3 kPa
Pump Flow Capacity17 gal/min64.4 L/min
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.