Skip to content
List a MachineMy account / sign in
Published dimensions and weight

Volvo L180H

The Volvo L180H is a wheel loader powered by a 328.6 hp engine.

01Published dimensions and weight
Dimensions reference
Wheel Loader category illustration
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02WeightNot publishedNot published
03Selected published values49
Published highlights
  • Breakout Force: 53077.39 lb / 236.1 kN
  • Ground Clearance: 2.01 ft / 610 mm
  • Length With Bucket On Ground: 29.7 ft / 9050 mm
  • Width Over Tires: 9.72 ft / 2960 mm
Typical use

Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Volvo L180H include published breakout force of 53077.39 lb / 236.1 kN, published engine power of 329.9 hp / 246 kw, the published “Ground Clearance” field of 2.01 ft / 610 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.

Buyer review notes
  • Compare the published “Breakout Force” field (53077.39 lb / 236.1 kN) with the specific machine's configuration and records; options and condition can differ.
  • Compare the published “Ground Clearance” field (2.01 ft / 610 mm) with the specific machine's configuration and records; options and condition can differ.
  • Compare the published “Length With Bucket On Ground” field (29.7 ft / 9050 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications

Published values, clearly grouped.

Published specifications and measurements are organized by section for quick reference.

01

Bucket

Breakout Force53077.39 lb236.1 kN
02

Dimensions

Ground Clearance2.01 ft610 mm
Length With Bucket On Ground29.7 ft9050 mm
Width Over Tires9.72 ft2960 mm
Height To Top Of Cab11.75 ft3580 mm
Wheelbase1.58 ft480 mm
Hinge Pin - Max Height14.67 ft4470 mm
03

Steering System

Working Pressure21 MPa, 210 bar21 MPa, 210 bar
Articulation Angle37 degrees37 degrees
Stroke1.8 ft525 mm
Steering Cylinders22
Cylinder Bore4 in100 mm
Rod Diameter2.4 in60 mm
Maximum Flow53.4 gal/min202 L/min
04

Hydraulic Cycle Times (Unloaded)

Lift6.4 sec6.4 sec
Lower3.3 sec3.3 sec
Tilt1.8 sec1.8 sec
Total Cycle Time11.5 sec11.5 sec
05

Electrical System

Battery Capacity2 x 170 Ah2 x 170 Ah
Cold Cranking Capacity1000 A1000 A
Alternator Rating2280/80 (W/A)2280/80 (W/A)
Starter Motor Output9.4 hp7 kw
Voltage24 V V24 V V
Batteries2 x 12 V2 x 12 V
06

Engine

Number Of Cylinders66
Engine ModelVolvo D13JVolvo D13J
Net Power328.6 hp245 kw
Gross Power329.9 hp246 kw
Power Measured @1400 rpm1400 rpm
Max TorqueGross - 2030 Nm, Net - 2024 NmGross - 2030 Nm, Net - 2024 Nm
Displacement781.2 cu in12.8 L
Torque Measured @1000 rpm1000 rpm
AspirationTurbochargedTurbocharged
07

Drive Train

Torque Multiplication, Stall Ratio2.09:12.09:1
Transport Speed, Maximum23.6 mph38 km/h
TransmissionVolvo HTL 223Volvo HTL 223
08

Operational

Def Tank Capacity8.2 gal31 L
Fuel Capacity96.7 gal366 L
Hydraulic System Fluid Capacity41.3 gal156 L
Engine Oil Fluid Capacity13.3 gal50 L
Cooling System Fluid Capacity14.6 gal55 L
Transmission Fluid Capacity12.7 gal48 L
09

Axles

Rear Axle Oscillation15 degrees15 degrees
Axle Oil Front12.2 gal46 L
Axle Oil Rear14.6 gal55 L
FrontVolvo AWB 40BVolvo AWB 40B
RearVolvo AWB 40BVolvo AWB 40B
10

Hydraulic System

Working PressurePump 1 - 29 MPa, Pump 2 - 31 MPa, Pump 3 - 25 MPaPump 1 - 29 MPa, Pump 2 - 31 MPa, Pump 3 - 25 MPa
Engine Speed1900 rpm1900 rpm
Need the machine, not just the numbers?

Find one, value one, or tell the market what you need.

Manufacturer-published specifications.

Other Volvo models