Skip to content
List a MachineMy account / sign in
Published dimensions and weight

Volvo L150H

The Volvo L150H is a wheel loader built around the Volvo D13J engine (295.1 hp).

01Published dimensions and weight
Dimensions reference
Wheel Loader category illustration
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02WeightNot publishedNot published
03Selected published values49
Published highlights
  • Breakout Force: 53077.39 lb / 236.1 kN
  • Ground Clearance: 2.01 ft / 610 mm
  • Length With Bucket On Ground: 28.91 ft / 8810 mm
  • Width Over Tires: 9.72 ft / 2960 mm
Typical use

Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Volvo L150H include published breakout force of 53077.39 lb / 236.1 kN, published engine power of 295.1 hp / 220 kw, the published “Ground Clearance” field of 2.01 ft / 610 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.

Buyer review notes
  • Compare the published “Breakout Force” field (53077.39 lb / 236.1 kN) with the specific machine's configuration and records; options and condition can differ.
  • Compare the published “Ground Clearance” field (2.01 ft / 610 mm) with the specific machine's configuration and records; options and condition can differ.
  • Compare the published “Length With Bucket On Ground” field (28.91 ft / 8810 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications

Published values, clearly grouped.

Published specifications and measurements are organized by section for quick reference.

01

Bucket

Breakout Force53077.39 lb236.1 kN
02

Dimensions

Ground Clearance2.01 ft610 mm
Length With Bucket On Ground28.91 ft8810 mm
Width Over Tires9.72 ft2960 mm
Height To Top Of Cab11.75 ft3580 mm
Wheelbase11.65 ft3550 mm
Hinge Pin - Max Height14.24 ft4340 mm
03

Steering System

Working Pressure21 MPa, 210 bar21 MPa, 210 bar
Articulation Angle37 degrees37 degrees
Stroke1.3 ft390 mm
Steering Cylinders22
Cylinder Bore4 in100 mm
Rod Diameter2.4 in60 mm
Maximum Flow53.4 gal/min202 L/min
04

Hydraulic Cycle Times (Unloaded)

Lift5.9 sec5.9 sec
Lower3.7 sec3.7 sec
Tilt2 sec2 sec
Total Cycle Time11.6 sec11.6 sec
05

Electrical System

Battery Capacity2 x 170 Ah2 x 170 Ah
Cold Cranking Capacity1000 A1000 A
Alternator Rating2280/80 (W/A)2280/80 (W/A)
Starter Motor Output9.4 hp7 kw
Voltage24 V V24 V V
Batteries2 x 12 V2 x 12 V
06

Engine

Number Of Cylinders66
Engine ModelVolvo D13JVolvo D13J
Net Power295.1 hp220 kw
Gross Power295.1 hp220 kw
Power Measured @1300 rpm1300 rpm
Max TorqueGross - 1960 Nm, Net - 1957 NmGross - 1960 Nm, Net - 1957 Nm
Displacement781.2 cu in12.8 L
Torque Measured @1000 rpm1000 rpm
AspirationTurbochargedTurbocharged
07

Drive Train

Torque Multiplication, Stall Ratio2.09:12.09:1
Transport Speed, Maximum23.6 mph38 km/h
TransmissionVolvo HTL 223Volvo HTL 223
08

Operational

Def Tank Capacity8.2 gal31 L
Fuel Capacity96.7 gal366 L
Hydraulic System Fluid Capacity41.3 gal156 L
Engine Oil Fluid Capacity13.3 gal50 L
Cooling System Fluid Capacity14.6 gal55 L
Transmission Fluid Capacity12.7 gal48 L
09

Axles

Rear Axle Oscillation15 degrees15 degrees
Axle Oil Front12.2 gal46 L
Axle Oil Rear14.6 gal55 L
FrontVolvo AWB 40BVolvo AWB 40B
RearVolvo AWB 40CVolvo AWB 40C
10

Hydraulic System

Working PressurePump 1 - 29 MPa, Pump 2 - 31 MPa, Pump 3 - 25 MPaPump 1 - 29 MPa, Pump 2 - 31 MPa, Pump 3 - 25 MPa
Engine Speed1900 rpm1900 rpm
Need the machine, not just the numbers?

Find one, value one, or tell the market what you need.

Manufacturer-published specifications.

Other Volvo models