- Dump Clearance At Max Raise: 4.22 ft / 1285 mm
- Bucket Capacity - Heaped: 3.93 yd3 / 3 m3
- Bucket Width: 9.59 ft / 2920 mm
- Breakout Force: 36419 lb / 162 kN
Published dimensions and weight
Terex TXL300-2
The Terex TXL300-2 is a wheel loader of about 17.3 t; its DL08 engine is rated at 217 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight38140 lb17300.1 kg
03Selected published values45
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Terex TXL300-2 include published bucket capacity of 3.93 yd3 / 3 m3, published breakout force of 36419 lb / 162 kN, published operating weight of 38140 lb / 17300.1 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (4.22 ft / 1285 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (3.93 yd3 / 3 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (9.59 ft / 2920 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise4.22 ft1285 mm
Bucket Capacity - Heaped3.93 yd33 m3
Bucket Width9.59 ft2920 mm
Breakout Force36419 lb162 kN
Dimensions
Ground Clearance1.55 ft470 mm
Length With Bucket On Ground26.74 ft8150 mm
Width Over Tires9.06 ft2760 mm
Height To Top Of Cab11.28 ft3438 mm
Wheelbase10.5 ft3200 mm
Hinge Pin - Max Height13.13 ft4000 mm
Reach At Max Lift And Dump4.22 ft1285 mm
Engine
Number Of Cylinders66
Engine Make22522252
Engine ModelDL08DL08
Gross Power217 hp161.9 kw
Power Measured @2000 rpm2000 rpm
Max Torque759 lb ft1029.1 Nm
Displacement466 cu in7.7 L
Torque Measured @1300 rpm1300 rpm
Aspirationturbochargedturbocharged
Operational
Operating Weight38140 lb17300.1 kg
Fuel Capacity87.2 gal330 L
Hydraulic System Fluid Capacity55.5 gal210 L
Engine Oil Fluid Capacity9.3 gal35 L
Cooling System Fluid Capacity13.3 gal50 L
Transmission Fluid Capacity12.7 gal48 L
Front Axle/Diff Fluid Capacity10.1 gal38 L
Rear Axle/Diff Fluid Capacity8 gal30 L
Static Tipping Weight31967.1 lb14500 kg
Turning Radius19.1 ft5800 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size23.5-25-16PR-L323.5-25-16PR-L3
Transmission
Transmission Typefull powershiftfull powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward21.5 mph34.5 km/h
Max Speed - Reverse14.8 mph23.8 km/h
Hydraulic System
Relief Valve Setting2900 psi19994.8 kPa
Pump Flow Capacity74 gal/min280.2 L/min
Raise Time5.9 sec5.9 sec
Dump Time1.9 sec1.9 sec
Lower Time3.7 sec3.7 sec
Pump Typetandem vane pumptandem vane pump
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.