- Dump Clearance At Max Raise: 9.19 ft / 2800 mm
- Bucket Capacity - Heaped: 3.14 yd3 / 2.4 m3
- Bucket Capacity - Struck: 2.62 yd3 / 2 m3
- Bucket Width: 8.14 ft / 2480 mm
Published dimensions and weight
TCM 840
The TCM 840 is a wheel loader of about 9.9 t, built around the 6BDIT engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight21803.8 lb9890 kg
03Selected published values44
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for TCM 840 include published bucket capacity of 3.14 yd3 / 2.4 m3, published breakout force of 23590 lb / 104.94 kN, published operating weight of 21803.8 lb / 9890 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.19 ft / 2800 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (3.14 yd3 / 2.4 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (2.62 yd3 / 2 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.19 ft2800 mm
Bucket Capacity - Heaped3.14 yd32.4 m3
Bucket Capacity - Struck2.62 yd32 m3
Bucket Width8.14 ft2480 mm
Breakout Force23590 lb104.94 kN
Dimensions
Ground Clearance1.22 ft370 mm
Length With Bucket On Ground21.76 ft6630 mm
Width Over Tires7.91 ft2410 mm
Height To Top Of Cab10.47 ft3190 mm
Wheelbase9.52 ft2900 mm
Hinge Pin - Max Height12.14 ft3700 mm
Reach At Max Lift And Dump3.48 ft1060 mm
Engine
Number Of Cylinders66
Engine Make23532353
Engine Model6BDIT6BDIT
Net Power123 hp91.8 kw
Power Measured @2200 rpm2200 rpm
Max Torque329 lb ft446.1 Nm
Torque Measured @1600 rpm1600 rpm
Aspirationturbochargedturbocharged
Operational
Operating Weight21803.8 lb9890 kg
Fuel Capacity45 gal170 L
Hydraulic System Fluid Capacity21.2 gal80 L
Engine Oil Fluid Capacity2.7 gal10 L
Cooling System Fluid Capacity10.9 gal41 L
Transmission Fluid Capacity5.3 gal20 L
Front Axle/Diff Fluid Capacity9 gal34 L
Rear Axle/Diff Fluid Capacity9 gal34 L
Static Tipping Weight17747.3 lb8050 kg
Operating Voltage24 V24 V
Alternator Supplied Amperage25 amps25 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size17.5-25-12PR L217.5-25-12PR L2
Transmission
Transmission Typecountershaft type full powershiftcountershaft type full powershift
Number Of Forward Gears33
Number Of Reverse Gears33
Max Speed - Forward21.7 mph34.8 km/h
Max Speed - Reverse21.7 mph34.8 km/h
Hydraulic System
Relief Valve Setting2700 psi18615.9 kPa
Pump Flow Capacity48.7 gal/min184 L/min
Raise Time6 sec6 sec
Dump Time1.5 sec1.5 sec
Lower Time3 sec3 sec
Pump Typeclosed and pressurizedclosed and pressurized
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.