- Dump Clearance At Max Raise: 7.58 ft / 2311 mm
- Bucket Capacity - Heaped: 1.44 yd3 / 1.11 m3
- Bucket Capacity - Struck: 0.85 yd3 / 0.65 m3
- Bucket Width: 5.42 ft / 1650 mm
Published dimensions and weight
Mustang ML28
The Mustang ML28 is a wheel loader of about 3.2 t, built around the 4TNV88 engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight7055 lb3200 kg
03Selected published values30
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Mustang ML28 include published bucket capacity of 1.44 yd3 / 1.11 m3, published breakout force of 6.14 lb / 28 kN, published operating weight of 7055 lb / 3200 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (7.58 ft / 2311 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.44 yd3 / 1.11 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (0.85 yd3 / 0.65 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise7.58 ft2311 mm
Bucket Capacity - Heaped1.44 yd31.11 m3
Bucket Capacity - Struck0.85 yd30.65 m3
Bucket Width5.42 ft1650 mm
Breakout Force6.14 lb28 kN
Dimensions
Ground Clearance1.08 ft330 mm
Length With Bucket On Ground15.67 ft4780 mm
Width Over Tires4.92 ft1500 mm
Height To Top Of Cab7.67 ft2340 mm
Wheelbase5.75 ft1750 mm
Hinge Pin - Max Height9.92 ft3022 mm
Reach At Max Lift And Dump0.84 ft254 mm
Engine
Number Of Cylinders44
Engine Make23482348
Engine Model4TNV884TNV88
Net Power39 hp29.1 kw
Gross Power48 hp35.8 kw
Power Measured @2400 rpm2400 rpm
Displacement133.6 cu in2.2 L
Operational
Operating Weight7055 lb3200 kg
Fuel Capacity15.9 gal60.2 L
Static Tipping Weight5181 lb2350 kg
Turning Radius11.2 ft3400 mm
Rear Axle Oscillation38 degrees38 degrees
Tire Size12.0 - 1812.0 - 18
Transmission
Transmission TypeHydrostaticHydrostatic
Max Speed - Forward12.4 mph20 km/h
Max Speed - Reverse12.4 mph20 km/h
Hydraulic System
Relief Valve Setting3336 psi23000.9 kPa
Pump Flow Capacity13.7 gal/min52 L/min
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.