- Dump Clearance At Max Raise: 9.51 ft / 2896 mm
- Bucket Capacity - Heaped: 2.6 yd3 / 1.99 m3
- Breakout Force: 22031 lb / 98 kN
- Ground Clearance: 1.42 ft / 432 mm
Published dimensions and weight
Link-Belt L125
The Link-Belt L125 is a wheel loader of about 11.3 t; its 6BTA5.9 engine is rated at 130 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight24912 lb11299.9 kg
03Selected published values44
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Link-Belt L125 include published bucket capacity of 2.6 yd3 / 1.99 m3, published breakout force of 22031 lb / 98 kN, published operating weight of 24912 lb / 11299.9 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.51 ft / 2896 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.6 yd3 / 1.99 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Breakout Force” field (22031 lb / 98 kN) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.51 ft2896 mm
Bucket Capacity - Heaped2.6 yd31.99 m3
Breakout Force22031 lb98 kN
Dimensions
Ground Clearance1.42 ft432 mm
Length With Bucket On Ground22.26 ft6782 mm
Width Over Tires7.67 ft2337 mm
Height To Top Of Cab10.67 ft3251 mm
Wheelbase9.51 ft2896 mm
Hinge Pin - Max Height12.59 ft3835 mm
Reach At Max Lift And Dump3.17 ft965 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine Model6BTA5.96BTA5.9
Net Power130 hp97 kw
Gross Power135 hp100.7 kw
Power Measured @2200 rpm2200 rpm
Max Torque419 lb ft568.1 Nm
Displacement360 cu in5.9 L
Torque Measured @1600 rpm1600 rpm
AspirationTurbocharged with IntercoolerTurbocharged with Intercooler
Operational
Operating Weight24912 lb11299.9 kg
Fuel Capacity52.9 gal200 L
Hydraulic System Fluid Capacity31.8 gal120 L
Engine Oil Fluid Capacity4.8 gal18 L
Transmission Fluid Capacity4.8 gal18 L
Front Axle/Diff Fluid Capacity3.5 gal13 L
Rear Axle/Diff Fluid Capacity3.5 gal13 L
Static Tipping Weight19450 lb8822.4 kg
Turning Radius18.2 ft5526 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size20.5 R2520.5 R25
Transmission
Transmission TypePower ShiftPower Shift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23.2 mph37.4 km/h
Max Speed - Reverse15.1 mph24.4 km/h
Hydraulic System
Relief Valve Setting4060 psi27992.7 kPa
Pump Flow Capacity32 gal/min121.2 L/min
Raise Time5.4 sec5.4 sec
Dump Time1.8 sec1.8 sec
Lower Time3.8 sec3.8 sec
Pump TypeVariable DisplacementVariable Displacement
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.