- Dump Clearance At Max Raise: 9.54 ft / 2905 mm
- Bucket Capacity - Heaped: 2.75 yd3 / 2.1 m3
- Bucket Width: 8.37 ft / 2550 mm
- Breakout Force: 28101.12 lb / 125 kN
Published dimensions and weight
Komatsu WA250-5
The Komatsu WA250-5 pairs the SAA6 D102 E engine (135 hp) with an operating weight near 11.6 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight25507.5 lb11570 kg
03Selected published values45
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Komatsu WA250-5 include published bucket capacity of 2.75 yd3 / 2.1 m3, published breakout force of 28101.12 lb / 125 kN, published operating weight of 25507.5 lb / 11570 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.54 ft / 2905 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.75 yd3 / 2.1 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (8.37 ft / 2550 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.54 ft2905 mm
Bucket Capacity - Heaped2.75 yd32.1 m3
Bucket Width8.37 ft2550 mm
Breakout Force28101.12 lb125 kN
Dimensions
Ground Clearance1.51 ft460 mm
Length With Bucket On Ground22.72 ft6925 mm
Width Over Tires8.11 ft2470 mm
Height To Top Of Cab10.63 ft3240 mm
Wheelbase9.52 ft2900 mm
Hinge Pin - Max Height12.42 ft3785 mm
Reach At Max Lift And Dump3.35 ft1020 mm
Engine
Number Of Cylinders66
Engine Make22382238
Engine ModelSAA6 D102 ESAA6 D102 E
Gross Power135 hp100.7 kw
Power Measured @2000 rpm2000 rpm
Max Torque455.9 lb ft618 Nm
Displacement360.1 cu in5.9 L
Torque Measured @1400 rpm1400 rpm
AspirationTurbochargedTurbocharged
Operational
Operating Weight25507.5 lb11570 kg
Fuel Capacity47.9 gal181 L
Hydraulic System Fluid Capacity17.7 gal67 L
Engine Oil Fluid Capacity5.2 gal19.5 L
Cooling System Fluid Capacity4.7 gal17.5 L
Transmission Fluid Capacity1.9 gal6.9 L
Front Axle/Diff Fluid Capacity4.8 gal18 L
Rear Axle/Diff Fluid Capacity4.8 gal18 L
Static Tipping Weight22068.3 lb10010 kg
Turning Radius17.2 ft5240 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage60 amps60 amps
Rear Axle Oscillation30 degrees30 degrees
Tire Size20.5 R2520.5 R25
Transmission
Transmission TypeElectronically controlled hydrostaticElectronically controlled hydrostatic
Number Of Forward Gears44
Number Of Reverse Gears44
Max Speed - Forward23.7 mph38 km/h
Max Speed - Reverse23.7 mph38 km/h
Hydraulic System
Relief Valve Setting3045.8 psi21000 kPa
Pump Flow Capacity43.1 gal/min163 L/min
Raise Time6.3 sec6.3 sec
Dump Time1.7 sec1.7 sec
Lower Time3.3 sec3.3 sec
Pump TypeGear PumpGear Pump
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.