- Ground Clearance: 16.74 in / 425 mm
- Wheelbase: 2600 in / 66040 mm
- Length: 252.96 in / 6425 mm
- Overall Height (To Top Of Cab): 10.04 ft / 3060 mm
Published dimensions and weight
Komatsu WA150-5
The Komatsu WA150-5 is a wheel loader of about 7.8 t, built around the SAA4D102E-2-B engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight17295.3 lb7845 kg
03Selected published values63
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Komatsu WA150-5 include published breakout force of 7400 kgf, published operating weight of 17295.3 lb / 7845 kg, published hydraulic flow of 32.5 gal/min / 123 L/min. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Ground Clearance” field (16.74 in / 425 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (2600 in / 66040 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Length” field (252.96 in / 6425 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Ground Clearance16.74 in425 mm
Wheelbase2600 in66040 mm
Length252.96 in6425 mm
Overall Height (To Top Of Cab)10.04 ft3060 mm
Turning Clearance Circle1045010450
Width Over Tyres87.41 in2220 mm
Engine
Horsepower, Gross-Sae J199599.3 hp74 kw
Horsepower, Net-Iso 924995.3 hp71 kw
Horsepower, Net-Sae J134995.3 hp71 kw
Fan Drive MethodHydraulicHydraulic
Lubrication SystemGear pump, force-lubricationGear pump, force-lubrication
FilterFull-flowFull-flow
Number Of Cylinders44
Piston Displacement239.3 cu in4 L
Engine Make22382238
Engine ModelSAA4D102E-2-BSAA4D102E-2-B
Engine TypeWater-cooled, 4-cycleWater-cooled, 4-cycle
Air CleanerDry-typeDry-type
GovernorMechanical, all-speed controlMechanical, all-speed control
Power Measured @2000 rpm2000 rpm
Displacement239.3 cu in4 L
AspirationTurbocharged, and air-to-air after cooledTurbocharged, and air-to-air after cooled
Bore4.1 in102 mm
Stroke4.8 in120 mm
Fuel SystemDirect injectionDirect injection
Driveline
BrakeHydraulic, wet discHydraulic, wet disc
Ride Control SystemStandardStandard
Maximum Speeds Fwd24.3 mph39 km/h
Maximum Speeds Rev24.3 mph39 km/h
Number Of Speeds - Forward44
Number Of Speeds - Reverse44
Transmission TypeHydrostaticHydrostatic
Operational
Bucket Capacity Range – Sae1.3-1.7 m31.3-1.7 m3
Standard Bucket Capacity – Sae2 yd31.5 m3
Bucket DescriptionGP Bucket, bolt on edgeGP Bucket, bolt on edge
Static Tipping Load,Full Turn13304.9 lb6035 kg
Breakout Force7400 kgf7400 kgf
Dump Clearance, @45 Degrees Dump Angle9 ft2730 mm
Dump Reach, @45 Degrees Dump Angle3.2 ft955 mm
Bucket Width7.9 ft2390 mm
Bucket Link TypeZ-BarZ-Bar
Operating Weight17295.3 lb7845 kg
Fuel Capacity35.2 gal133 L
Transmission
Transmission Typehydrostatic transmissionhydrostatic transmission
Number Of Forward Gears44
Number Of Reverse Gears44
Tires
Standard Fitment Size17.5 R25 L217.5 R25 L2
Hydraulic System
Steering Pump TypeGearGear
Loader Control TypeGearGear
Steering System Relief Valve Setting391.7 psi2700 kPa
Loader Control Relief Valve Setting435.2 psi3000 kPa
Control Valve2-spool open center type2-spool open center type
Lift Cylinder Stroke24.8 in628 mm
Lift Cylinder22
Lift Cylinder Bore4.4 in110 mm
Bucket Cylinde Bore4.4 in110 mm
Bucket Cylinde Stroke17.8 in452 mm
Relief Valve Setting3045.8 psi21000 kPa
Pump Flow Capacity32.5 gal/min123 L/min
Raise Time5.8 sec5.8 sec
Dump Time1.1 sec1.1 sec
Lower Time3.6 sec3.6 sec
Pump Typegeargear
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.