- Dump Clearance At Max Raise: 10.06 ft / 3065 mm
- Bucket Capacity - Heaped: 6.22 yd3 / 4.75 m3
- Bucket Capacity - Struck: 5.56 yd3 / 4.25 m3
- Bucket Width: 11.32 ft / 3450 mm
Published dimensions and weight
Kawasaki 95ZII
The Kawasaki 95ZII is a wheel loader of about 28.1 t, built around the NTA-855-C335 engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale

01Dimensions referenceLength × width × height
02Operating Weight61840 lb28050.2 kg
03Selected published values44
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Kawasaki 95ZII include published bucket capacity of 6.22 yd3 / 4.75 m3, published breakout force of 50550 lb / 224.86 kN, published operating weight of 61840 lb / 28050.2 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (10.06 ft / 3065 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (6.22 yd3 / 4.75 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (5.56 yd3 / 4.25 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise10.06 ft3065 mm
Bucket Capacity - Heaped6.22 yd34.75 m3
Bucket Capacity - Struck5.56 yd34.25 m3
Bucket Width11.32 ft3450 mm
Breakout Force50550 lb224.86 kN
Dimensions
Ground Clearance1.48 ft450 mm
Length With Bucket On Ground28.25 ft8610 mm
Width Over Tires10.21 ft3110 mm
Height To Top Of Cab12.64 ft3850 mm
Wheelbase11.55 ft3520 mm
Hinge Pin - Max Height14.28 ft4350 mm
Reach At Max Lift And Dump4.86 ft1480 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelNTA-855-C335NTA-855-C335
Gross Power310 hp231.2 kw
Power Measured @2100 rpm2100 rpm
Displacement885 cu in14.6 L
Aspirationturbocharged & after cooledturbocharged & after cooled
Operational
Operating Weight61840 lb28050.2 kg
Fuel Capacity113.6 gal430 L
Hydraulic System Fluid Capacity95.2 gal360 L
Engine Oil Fluid Capacity11.4 gal43 L
Cooling System Fluid Capacity22.5 gal85 L
Transmission Fluid Capacity15.9 gal60 L
Front Axle/Diff Fluid Capacity19.1 gal72 L
Rear Axle/Diff Fluid Capacity19.1 gal72 L
Static Tipping Weight40120 lb18198.2 kg
Turning Radius25.4 ft7725 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage75 amps75 amps
Rear Axle Oscillation22 degrees22 degrees
Tire Size26.5-25-24PR (L3)26.5-25-24PR (L3)
Transmission
Transmission Typepower shiftpower shift
Number Of Forward Gears44
Number Of Reverse Gears22
Max Speed - Forward21.4 mph34.5 km/h
Max Speed - Reverse12 mph19.4 km/h
Hydraulic System
Relief Valve Setting2490 psi17168 kPa
Pump Flow Capacity44.1 gal/min167 L/min
Raise Time6.7 sec6.7 sec
Dump Time1.3 sec1.3 sec
Lower Time4.1 sec4.1 sec
Pump Typegear typegear type
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.