- Dump Clearance At Max Raise: 9.91 ft / 3020 mm
- Bucket Capacity - Heaped: 4.98 yd3 / 3.8 m3
- Bucket Capacity - Struck: 4.26 yd3 / 3.25 m3
- Bucket Width: 10.18 ft / 3100 mm
Published dimensions and weight
Kawasaki 90ZIV
The Kawasaki 90ZIV is a wheel loader of about 21.9 t, built around the M11-C engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight48215.1 lb21870 kg
03Selected published values46
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Kawasaki 90ZIV include published bucket capacity of 4.98 yd3 / 3.8 m3, published breakout force of 46075 lb / 204.96 kN, published operating weight of 48215.1 lb / 21870 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.91 ft / 3020 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (4.98 yd3 / 3.8 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (4.26 yd3 / 3.25 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.91 ft3020 mm
Bucket Capacity - Heaped4.98 yd33.8 m3
Bucket Capacity - Struck4.26 yd33.25 m3
Bucket Width10.18 ft3100 mm
Breakout Force46075 lb204.96 kN
Dimensions
Ground Clearance1.69 ft515 mm
Length With Bucket On Ground27.35 ft8335 mm
Width Over Tires9.62 ft2930 mm
Height To Top Of Cab11.59 ft3530 mm
Wheelbase11.16 ft3400 mm
Hinge Pin - Max Height13.98 ft4260 mm
Reach At Max Lift And Dump4.07 ft1240 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelM11-CM11-C
Net Power256 hp190.9 kw
Power Measured @2100 rpm2100 rpm
Max Torque832 lb ft1128.1 Nm
Displacement660 cu in10.9 L
Torque Measured @1300 rpm1300 rpm
Aspirationturbocharged & after cooledturbocharged & after cooled
Operational
Operating Weight48215.1 lb21870 kg
Fuel Capacity84.6 gal320 L
Hydraulic System Fluid Capacity71.4 gal270 L
Engine Oil Fluid Capacity9.8 gal37 L
Cooling System Fluid Capacity14.8 gal56 L
Transmission Fluid Capacity15.9 gal60 L
Front Axle/Diff Fluid Capacity19.9 gal75 L
Rear Axle/Diff Fluid Capacity21.2 gal80 L
Static Tipping Weight35406.3 lb16060 kg
Turning Radius22.4 ft6825 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage75 amps75 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size26.5x25-20PR (L-3)26.5x25-20PR (L-3)
Transmission
Transmission Typefull powershiftfull powershift
Number Of Forward Gears44
Number Of Reverse Gears44
Max Speed - Forward20.5 mph33 km/h
Max Speed - Reverse20.8 mph33.5 km/h
Hydraulic System
Relief Valve Setting3000 psi20684.3 kPa
Pump Flow Capacity19.5 gal/min73.9 L/min
Raise Time6.1 sec6.1 sec
Dump Time1.5 sec1.5 sec
Lower Time3 sec3 sec
Pump Typegear typegear type
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.