- Dump Clearance At Max Raise: 6.46 ft / 1969 mm
- Bucket Width: 3.67 ft / 1118 mm
- Ground Clearance: 0.63 ft / 191 mm
- Length With Bucket On Ground: 11.22 ft / 3419 mm
Published dimensions and weight
Gehl 140
The Gehl 140 is a 1.8 t-class wheel loader with a 23.3 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight3911.1 lb1774 kg
03Selected published values65
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Gehl 140 include published operating weight of 3911.1 lb / 1774 kg, published engine power of 23.3 hp / 17.4 kw, published hydraulic flow of 20.9 gal/min / 79 L/min. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (6.46 ft / 1969 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Width” field (3.67 ft / 1118 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Ground Clearance” field (0.63 ft / 191 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise6.46 ft1969 mm
Bucket Width3.67 ft1118 mm
Dimensions
Ground Clearance0.63 ft191 mm
Length With Bucket On Ground11.22 ft3419 mm
Width Over Tires3.45 ft1049 mm
Height To Top Of Cab7.19 ft2189 mm
Wheelbase4.43 ft1349 mm
Hinge Pin - Max Height8.88 ft2705 mm
Reach At Max Lift And Dump1.3 ft394 mm
Length Of Machine*397.6 in10099.05 mm
Basic Blade Width140 in3556 mm
Note*Typically equipped with push block and ripper.*Typically equipped with push block and ripper.
Maximum Height132 in3352.8 mm
Width97.6 in97.6 in
Engine
Number Of Cylinders66
Engine Make23482348
Engine Model3TNV763TNV76
Net Power23.3 hp17.4 kw
Power Measured @2800 rpm2800 rpm
Displacement567.5 cu in9.3 L
Bore4.5 in114.3 mm
Stroke5.9 in149.9 mm
EmissionsU.S. EPA Tier 4 Final/EU Stage IVU.S. EPA Tier 4 Final/EU Stage IV
Net Power - Eec 80/1269250 hp186.5 kw
Maximum Torque827 lb ft1121.3 Nm
Net Power - Iso 9249/Sae J1349250 hp186.5 kw
Base Power (1st Gear) - Net177 hp132 kw
Standard Capability109 degrees109 degrees
Torque Rise - Iso 929440%40%
Operational
Operating Weight3911.1 lb1774 kg
Fuel Capacity6.9 gal26 L
Hydraulic System Fluid Capacity9 gal34 L
Static Tipping Weight1929.1 lb875 kg
Turning Radius6.9 ft2101 mm
Operating Voltage12 V12 V
Tire Size27x10.5-1527x10.5-15
Transmission
Max Speed - Forward10.5 mph16.9 km/h
Max Speed - Reverse10.5 mph16.9 km/h
Hydraulic System
Relief Valve Setting4640 psi31991.7 kPa
Pump Flow Capacity20.9 gal/min79 L/min
Moldboard
Cutting Edge6 in6 in
Blade Width12 ft3.7 m
Arc Radius16.3 in414.1 mm
Throat Clearance6.5 in165.1 mm
End Bit6 in152.4 mm
Service Refill
Fuel Tank100 gal378.6 L
Hydraulic System14.5 gal54.9 L
Cooling System15 gal56.8 L
Def Tank3.3 gal12.5 L
Circle Drive1.8 gal6.9 L
Engine Crankcase7.9 gal30 L
Front Wheel Spindle Bearing - Each0.2 gal0.5 L
Machine Weight
Note*Typically equipped with push block and ripper.*Typically equipped with push block and ripper.
Weight*42.4 lb19.2 kg
All-Wheel Drive (Awd) Weight44.7 lb20.3 kg
Blade Range
Circle Centershift - Right28.6 in726.5 mm
Circle Centershift - Left29.6 in751.9 mm
Moldboard Sideshift - Right20.1 in510.6 mm
Moldboard Sideshift - Left26.1 in663 mm
Blade Tip Range - Forward40 degrees40 degrees
Blade Tip Range - Backward5 degrees5 degrees
Maximum Shoulder Reach Outside Of Tires - Right75.9 in1927.9 mm
Maximum Shoulder Reach Outside Of Tires - Left69.4 in1762.8 mm
Maximum Lift Above Ground18.9 in480.1 mm
Maximum Depth Of Cut28.9 in734.1 mm
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.