- Dump Clearance At Max Raise: 9.83 ft / 300 mm
- Breakout Force: 30247 lb / 13720 kN
- Bucket Capacity - Heaped: 3.7 yd3 / 2.8 m3
- Bucket Capacity - Struck: 3.15 yd3 / 2.41 m3
Published dimensions and weight
Dressta 530H
The Dressta 530H is a wheel loader of about 16.5 t, built around the C 8.3 engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight36376 lb16500 kg
03Selected published values44
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Dressta 530H include published bucket capacity of 3.7 yd3 / 2.8 m3, published breakout force of 30247 lb / 13720 kN, published operating weight of 36376 lb / 16500 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.83 ft / 300 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Breakout Force” field (30247 lb / 13720 kN) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (3.7 yd3 / 2.8 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.83 ft300 mm
Breakout Force30247 lb13720 kN
Bucket Capacity - Heaped3.7 yd32.8 m3
Bucket Capacity - Struck3.15 yd32.41 m3
Bucket Width9.83 ft300 mm
Dimensions
Ground Clearance1.67 ft506 mm
Length With Bucket On Ground26.25 ft79900 mm
Width Over Tires6.92 ft2100 mm
Height To Top Of Cab11.17 ft3404.62 mm
Wheelbase10.83 ft3300.99 mm
Hinge Pin - Max Height12.1 ft39600 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelC 8.3C 8.3
Net Power195 hp145 kw
Gross Power205 hp153 kw
Power Measured @2000 rpm2000 rpm
Max Torque714 lb ft968 Nm
Displacement504.5 cu in8.3 L
Torque Measured @1500 rpm1500 rpm
Aspiration4-cycle diesel, turbocharged, CAC, direct start, direct injection4-cycle diesel, turbocharged, CAC, direct start, direct injection
Operational
Operating Weight36376 lb16500 kg
Fuel Capacity79.3 gal300 L
Hydraulic System Fluid Capacity43.6 gal165 L
Engine Oil Fluid Capacity5 gal19 L
Cooling System Fluid Capacity6.3 gal24 L
Transmission Fluid Capacity8.2 gal31 L
Static Tipping Weight29916 lb13570 kg
Turning Radius21.5 ft6540 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size23.5x25,20 PR(L-3)23.5x25,20 PR(L-3)
Transmission
Transmission TypeFull power shift type, electrically controlled transmission with automatic gear shifting systemFull power shift type, electrically controlled transmission with automatic gear shifting system
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward22.4 mph37.3 km/h
Max Speed - Reverse16.4 mph26.4 km/h
Hydraulic System
Relief Valve Setting3000 psi20684.3 kPa
Pump Flow Capacity72 gal/min277 L/min
Raise Time5.9 sec5.9 sec
Dump Time2.5 sec2.5 sec
Lower Time4 sec4 sec
Pump TypeThree multiple vane cartriges, driven from accessory drive.Three multiple vane cartriges, driven from accessory drive.
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.