Published dimensions and weight

Caterpillar 930K

Weighing roughly 13.1 t and rated at 152 hp, the Caterpillar 930K is a wheel loader in its size class.

01Published dimensions and weight

Dimensions reference

Measurement reference — not to scale

01Dimensions referenceLength × width × height

02Operating Weight28948 lb13130.6 kg

03Selected published values84

Published highlights

Bucket Pin Height - Maximum Lift: 12.8 ft / 3.91 m
Carry Height: 1.5 ft / 0.46 m
Centerline Of Front Axle To Hitch: 4.91 ft / 1.5 m
Digging Depth: 3.8 in / 96.52 mm

Typical use

Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Caterpillar 930K include published operating weight of 28948 lb / 13130.6 kg, published engine power of 154 hp / 114.9 kw, published hydraulic flow of 50 gal/min / 189.3 L/min. These values describe the published configuration; verify the specific machine's configuration, attachments and records.

Buyer review notes

Compare the published “Bucket Pin Height - Maximum Lift” field (12.8 ft / 3.91 m) with the specific machine's configuration and records; options and condition can differ.
Compare the published “Carry Height” field (1.5 ft / 0.46 m) with the specific machine's configuration and records; options and condition can differ.
Compare the published “Centerline Of Front Axle To Hitch” field (4.91 ft / 1.5 m) with the specific machine's configuration and records; options and condition can differ.

02Specifications

Published values, clearly grouped.

Published specifications and measurements are organized by section for quick reference.

Dimensions

Bucket Pin Height - Maximum Lift12.8 ft3.91 m

Carry Height1.5 ft0.46 m

Centerline Of Front Axle To Hitch4.91 ft1.5 m

Digging Depth3.8 in96.52 mm

Dump Angle At Maximum Lift49 degrees49 degrees

Dump Clearance At Maximum Lift - 45 Degrees9.25 ft2.82 m

Height - Center Of Axle2.21 ft0.68 m

Height - Top Of Rops/Fops10.9 ft3.33 m

Length - Rear Axle To Bumper6.5 ft1.99 m

Overall Height - Bucket Raised16.8 ft5.13 m

Overall Length24.66 ft7516.37 mm

Rack Back Angle - Carry45 degrees45 degrees

Rack Back Angle - Maximum Lift54 degrees54 degrees

Reach At Maximum Lift And 45 Degrees Dump3.4 ft1.04 m

Wheel Base9.81 ft2.99 m

Engine

Number Of Cylinders66

Engine Make22362236

Engine ModelC7.1 ACERTC7.1 ACERT

Net Power152 hp113.4 kw

Gross Power154 hp114.9 kw

Max Torque580 lb ft786.4 Nm

Displacement402 cu in6.6 L

Net Torque551 lb ft747.1 Nm

Bore4 in101.6 mm

Stroke5 in127 mm

Eec 80/1269156 hp116.4 kw

Rated Net Power154 hp114.9 kw

Sae J1349154 hp114.9 kw

Iso 9249 (1997)156 hp116.4 kw

Operational

Operating Weight28948 lb13130.6 kg

Fuel Capacity51.5 gal195 L

Hydraulic System Fluid Capacity43.6 gal165.1 L

Cooling System Fluid Capacity8.5 gal32.2 L

Transmission Fluid Capacity2.2 gal8.4 L

Front Axle/Diff Fluid Capacity6.9 gal26.2 L

Rear Axle/Diff Fluid Capacity6.9 gal26.2 L

Tire Size20.520.5

Transmission

Number Of Forward Gears44

Number Of Reverse Gears44

Max Speed - Forward25 mph40.3 km/h

Max Speed - Reverse25 mph40.3 km/h

Forward - 18 mph12.9 km/h

Reverse - 18 mph12.9 km/h

28 mph12.9 km/h

317 mph27.4 km/h

425 mph40.3 km/h

Standard Transmission Maximum Travel Speeds25 mph40.3 km/h

Steering

Steering Angle - Each Direction40 degrees40 degrees

Steering Cylinder, Two, Bore2.8 in71.2 mm

Maximum Working Pressure3500 psi3500 psi

Steering Articulation40 degrees40 degrees

Weights

Operating Weight30479 lb13825.1 kg

Tires

Size20.5 R25, radial (L-3)20.5 R25, radial (L-3)

Buckets

Bucket Capacities2.1 m3 - 5.0 m3 2.7 yd3 - 6.5 yd32.1 m3 - 5.0 m3 2.7 yd3 - 6.5 yd3

Hydraulic System

Relief Valve Setting3626 psi25000.4 kPa

Pump Flow Capacity50 gal/min189.3 L/min

Raise Time5.7 sec5.7 sec

Dump Time1.7 sec1.7 sec

Lower Time2.7 sec2.7 sec

Operating Specifications

Static Tipping Load - Full Turn18444 lb8366.1 kg

Articulation Angle40 degrees40 degrees

Reach - Full Lift And 45 Degrees Dump3.4 ft1.1 m

Dump Clearance At Full Lift And 45 Degrees Dump Angle9.3 ft2.9 m

Service Refill Capacities

Cooling System7.9 gal30 L

Fuel Tank51.5 gal195 L

Crankcase5.3 gal20.1 L

Hydraulic Tank23.8 gal90.1 L

Hydraulic System - Including Tank43.6 gal165.1 L

Transmission2.2 gal8.4 L

Front6.9 gal26.2 L

Rear6.6 gal25 L

Cab

RopsSAE J1040 MAY94, ISO 3471-1994SAE J1040 MAY94, ISO 3471-1994

FopsSAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level IISAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II

Loader Hydraulic System

Pump Flow - Implement Pump50 gal/min50 gal/min

Maximum Working Pressure3626 psi3626 psi

Raise5.1 s5.1 s

Dump1.5 s1.5 s

Lower, Empty, Float Down2.7 s2.7 s

Total9.3 s9.3 s

Bore (1)4.7 in119.4 mm

Stroke (1)28.7 in729 mm

Bore (2)5.9 in149.9 mm

Stroke (2)21.9 in556.3 mm

Hydraulic Cycle Time9.3 sec9.3 sec

Need the machine, not just the numbers?

Find one, value one, or tell the market what you need.

View Caterpillar 930K listings Get a valuation for your Caterpillar 930K Post a want-to-buy request

Manufacturer-published specifications.

Caterpillar 930K

Published values, clearly grouped.

Find one, value one, or tell the market what you need.

Other Caterpillar models