- Ground Clearance: 1.34 ft / 408.44 mm
- Bucket Pin Height - Maximum Lift: 12.7 ft / 3.88 m
- Carry Height: 1.47 ft / 0.45 m
- Centerline Of Front Axle To Hitch: 4.76 ft / 1.46 m
Published dimensions and weight
Caterpillar 928Hz
The Caterpillar 928Hz is a 12.6 t-class wheel loader with a 149 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight27699 lb12564.1 kg
03Selected published values77
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Caterpillar 928Hz include published operating weight of 27699 lb / 12564.1 kg, the published “Ground Clearance” field of 1.34 ft / 408.44 mm, the published “Bucket Pin Height - Maximum Lift” field of 12.7 ft / 3.88 m. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Ground Clearance” field (1.34 ft / 408.44 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Pin Height - Maximum Lift” field (12.7 ft / 3.88 m) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Carry Height” field (1.47 ft / 0.45 m) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Ground Clearance1.34 ft408.44 mm
Bucket Pin Height - Maximum Lift12.7 ft3.88 m
Carry Height1.47 ft0.45 m
Centerline Of Front Axle To Hitch4.76 ft1.46 m
Digging Depth3.39 in86.11 mm
Dump Angle At Maximum Lift45 degrees45 degrees
Dump Clearance At Maximum Lift - 45 Degrees9.45 ft2.89 m
Height - Center Of Axle2.25 ft0.69 m
Height - Top Of Exhaust Stack10.46 ft3.19 m
Height - Top Of Hood86.52 in2197.61 mm
Height - Top Of Rops/Fops10.73 ft3.28 m
Length - Rear Axle To Bumper6.3 ft1.93 m
Overall Height - Bucket Raised16.31 ft4.98 m
Overall Length23.79 ft7251.2 mm
Rack Back Angle - Carry47.8 degrees47.8 degrees
Rack Back Angle - Ground44 degrees44 degrees
Rack Back Angle - Maximum Lift60 degrees60 degrees
Reach At Maximum Lift And 45 Degrees Dump3.04 ft0.93 m
Wheel Base9.51 ft2.9 m
Bucket Clearance-Maximum Lift/Carry12.31 ft3.76 m
Width - Over Tires8.43 ft2.57 m
Engine
Displacement403 cu in6.7 L
Net Torque536 lb ft726.8 Nm
Peak Torque547 lb ft741.7 Nm
Bore4.2 in105 mm
Stroke5 in127 mm
Rated Net Power149 hp111.2 kw
Sae J1349 (2)160 hp119.4 kw
Iso 9249 (1997) (2)161 hp120.1 kw
Eec 80/1269 (2)161 hp120.1 kw
Sae J1349 (1)149 hp111.2 kw
Iso 9249 (1997) (1)150 hp111.9 kw
Eec 80/1269 (1)150 hp111.9 kw
Maximum Net Power - 2000 Rpm160 hp119.4 kw
Operational
Operating Weight27699 lb12564.1 kg
Transmission
Forward - 14.9 mph7.9 km/h
Reverse - 14.9 mph7.9 km/h
27.8 mph12.6 km/h
316 mph25.8 km/h
423.4 mph37.7 km/h
Standard Transmission Maximum Travel Speeds23.4 mph37.7 km/h
Steering
Steering Angle - Each Direction40 degrees40 degrees
Minimum Turning Radius - Over Tires206 in5232.4 mm
Steering Cylinder, Two, Bore2.8 in69.9 mm
Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi)27 gal/min27 gal/min
Maximum Working Pressure3000 psi3000 psi
Steering Articulation40 degrees40 degrees
Tires
Tread Width8.5 ft2.6 m
Size20.5 R25 L3 XHA20.5 R25 L3 XHA
Buckets
Bucket Capacities2.0 m3 - 2.3 m3 2.6 yd3 - 3.0 yd32.0 m3 - 2.3 m3 2.6 yd3 - 3.0 yd3
Operating Specifications
Static Tipping Load - Full Turn19089 lb8658.7 kg
Articulation Angle40 degrees40 degrees
Reach - Full Lift And 45 Degrees Dump3 ft1 m
Dump Clearance At Full Lift And 45 Degrees Dump Angle9.5 ft2.9 m
Service Refill Capacities
Cooling System11.1 gal42.1 L
Fuel Tank59.4 gal224.9 L
Crankcase4 gal15.2 L
Hydraulic Tank18.5 gal70.1 L
Hydraulic System - Including Tank33 gal125 L
Transmission9.1 gal34.5 L
Front6.9 gal26.2 L
Rear6.6 gal25 L
Cab
RopsSAE J1040 MAY94, ISO 3471-1994SAE J1040 MAY94, ISO 3471-1994
FopsSAE J/ISO 3449 APR98 Level II, ISO 3449-1992 Level IISAE J/ISO 3449 APR98 Level II, ISO 3449-1992 Level II
Loader Hydraulic System
Pump Flow - Implement Pump40.2 gal/min40.2 gal/min
Output At 2,300 Engine Rpm And 6900 Kpa (1000 Psi) With Sae 10w Oil At 65 Degreesc (150 Degreesf)40.3 gal/min40.3 gal/min
Maximum Working Pressure3755 psi3755 psi
Raise6.1 s6.1 s
Dump1.2 s1.2 s
Lower, Empty, Float Down2.8 s2.8 s
Total10.1 s10.1 s
Bore (1)4.8 in120.7 mm
Stroke (1)27 in685.8 mm
Bore (2)5 in127 mm
Stroke (2)21.7 in551.2 mm
Hydraulic Cycle Time10.1 Seconds10.1 Seconds
Relief Pressure - Implement Pump3755 psi3755 psi
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.