- Dump Clearance At Max Raise: 9.45 ft / 2879 mm
- Bucket Capacity - Heaped: 2.23 yd3 / 1.7 m3
- Breakout Force: 25849 lb / 25849 -
- Bucket Width: 8.37 ft / 2549 mm
Published dimensions and weight
Caterpillar 928G
The Caterpillar 928G is a 11.7 t-class wheel loader with a 125 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight25699.3 lb11657 kg
03Selected published values97
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Caterpillar 928G include published bucket capacity of 2.23 yd3 / 1.7 m3, published breakout force of 25849 lb, published operating weight of 25699.3 lb / 11657 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.45 ft / 2879 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.23 yd3 / 1.7 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Breakout Force” field (25849 lb / 25849 -) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.45 ft2879 mm
Bucket Capacity - Heaped2.23 yd31.7 m3
Breakout Force25849 lb25849 -
Bucket Width8.37 ft2549 mm
Dimensions
Ground Clearance1.4 ft426.72 mm
Length With Bucket On Ground23.81 ft7255 mm
Width Over Tires8.01 ft2440 mm
Height To Top Of Cab10.73 ft3269 mm
Reach At Max Lift And Dump3.05 ft927 mm
Centerline Of Front Axle To Hitch4.91 ft1.5 m
Dump Clearance At Maximum Lift - 45 Degrees9.5 ft2.9 m
Carry Height3 ft0.92 m
Height - Center Of Axle2.3 ft0.71 m
Height - Top Of Exhaust Stack10.6 ft3.24 m
Height - Top Of Hood87.6 in2225.04 mm
Height - Top Of Rops/Fops10.8 ft3.3 m
Length - Rear Axle To Bumper6.4 ft1.96 m
Bucket Pin Height - Maximum Lift12.4 ft3.78 m
Overall Height16.4 ft4998.72 mm
Overall Height - Bucket Raised16.4 ft5 m
Overall Length23.1 ft7040.88 mm
Rack Back Angle - Carry47.8 degrees47.8 degrees
Rack Back Angle - Ground44 degrees44 degrees
Rack Back Angle - Maximum Lift58 degrees58 degrees
Reach At Maximum Lift And 45 Degrees Dump3 ft0.92 m
Wheel Base9.6 ft2.93 m
Wheel Base Length9.6 ft2.93 m
Width - Over Tires77 ft23.47 m
Digging Depth3.4 in86.36 mm
Bucket Clearance-Maximum Lift/Carry12.4 ft3.78 m
Dump Angle At Maximum Lift45 degrees45 degrees
Engine
Engine Model3116T3116T
Net Power125 hp93.3 kw
Displacement366 cu in6 L
Bore4 in100.1 mm
Stroke5 in127 mm
Rated Net Power143 hp106.7 kw
Sae J1349 (2)155 hp115.6 kw
Iso 9249 (1997) (2)156 hp116.4 kw
Eec 80/1269 (2)156 hp116.4 kw
Sae J1349 (1)143 hp106.7 kw
Iso 9249 (1997) (1)145 hp108.2 kw
Eec 80/1269 (1)145 hp108.2 kw
Maximum Net Power - 2000 Rpm155 hp115.6 kw
Operational
Operating Weight25699.3 lb11657 kg
Fuel Capacity60.8 gal230 L
Hydraulic System Fluid Capacity33.1 gal125 L
Static Tipping Weight20350.9 lb9231 kg
Transmission
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward22.9 mph36.7 km/h
Max Speed - Reverse15.3 mph24.6 km/h
Forward - 14.9 mph7.9 km/h
Reverse - 14.9 mph7.9 km/h
27.8 mph12.6 km/h
316 mph25.8 km/h
423.4 mph37.7 km/h
Steering
Steering Angle - Each Direction40 degrees40 degrees
Minimum Turning Radius - Over Tires206 in5232.4 mm
Steering Cylinder, Two, Bore2.8 in69.9 mm
Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi)27 gal/min27 gal/min
Maximum Working Pressure3000 psi3000 psi
Weights
Operating Weight27140 lb12310.5 kg
Tires
Tread Width96 ft29.3 m
Size17.5-25PR (L-2)17.5-25PR (L-2)
Buckets
Bucket Capacities1.9 m3 - 2.3 m3 2.5 yd3 - 3.0 yd31.9 m3 - 2.3 m3 2.5 yd3 - 3.0 yd3
Hydraulic System
Raise Time6.1 sec6.1 sec
Dump Time1.2 sec1.2 sec
Lower Time2.8 sec2.8 sec
Axles
Axle Oscillation11 degrees11 degrees
Operating Specifications
Static Tipping Load - Full Turn18018 lb8172.9 kg
Breakout Force25849 lb11725 kg
Articulation Angle40 degrees40 degrees
Reach - Full Lift And 45 Degrees Dump3 ft1 m
Dump Clearance At Full Lift And 45 Degrees Dump Angle9.5 ft2.9 m
Service Refill Capacities
Cooling System11.1 gal42.1 L
Fuel Tank59.4 gal224.9 L
Crankcase4.2 gal15.9 L
Hydraulic Tank18.5 gal70.1 L
Hydraulic System - Including Tank33 gal125 L
Transmission9.1 gal34.5 L
Front6.9 gal26.2 L
Rear6.6 gal25 L
Cab
RopsSAE J1040 MAY94, ISO 3471-1994SAE J1040 MAY94, ISO 3471-1994
FopsSAE J231 JAN81, ISO 3449-1992 Level IISAE J231 JAN81, ISO 3449-1992 Level II
Loader Hydraulic System
Relief Valve Setting3600 psi3600 psi
Pump Flow - Implement Pump40.15 gal/min40.15 gal/min
Output At 2,300 Engine Rpm And 6900 Kpa (1000 Psi) With Sae 10w Oil At 65 Degreesc (150 Degreesf)40.3 gal/min40.3 gal/min
Raise6.1 s6.1 s
Dump1.2 s1.2 s
Lower, Empty, Float Down2.8 s2.8 s
Total10.1 s10.1 s
Bore (1)4.8 in120.7 mm
Stroke (1)27 in685.8 mm
Bore (2)5 in127 mm
Stroke (2)21.7 in551.2 mm
Hydraulic Cycle Time10.1 s10.1 s
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.