- Ground Clearance: 1.43 ft / 435.87 mm
- Bucket Pin Height - Maximum Lift: 12.33 ft / 3.76 m
- Carry Height: 1.43 ft / 0.44 m
- Centerline Of Front Axle To Hitch: 4.59 ft / 1.4 m
Published dimensions and weight
Caterpillar 924Hz
Weighing roughly 11 t and rated at 128 hp, the Caterpillar 924Hz is a wheel loader in its size class.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight24180 lb10967.9 kg
03Selected published values80
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Caterpillar 924Hz include published operating weight of 24180 lb / 10967.9 kg, the published “Ground Clearance” field of 1.43 ft / 435.87 mm, the published “Bucket Pin Height - Maximum Lift” field of 12.33 ft / 3.76 m. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Ground Clearance” field (1.43 ft / 435.87 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Pin Height - Maximum Lift” field (12.33 ft / 3.76 m) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Carry Height” field (1.43 ft / 0.44 m) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Ground Clearance1.43 ft435.87 mm
Bucket Pin Height - Maximum Lift12.33 ft3.76 m
Carry Height1.43 ft0.44 m
Centerline Of Front Axle To Hitch4.59 ft1.4 m
Digging Depth1.65 in41.91 mm
Dump Clearance At Maximum Lift - 45 Degrees9.28 ft2.83 m
Height - Center Of Axle2.27 ft0.7 m
Height - Top Of Exhaust Stack10.53 ft3.21 m
Height - Top Of Hood87.36 in2218.95 mm
Height - Top Of Rops/Fops10.59 ft3.23 m
Length - Rear Axle To Bumper6.44 ft1.97 m
Overall Height - Bucket Raised15.78 ft4.81 m
Overall Length22.63 ft6897.63 mm
Reach At Maximum Lift And 45 Degrees Dump2.6 ft0.8 m
Bucket Clearance-Maximum Lift/Carry11.26 ft3.44 m
Wheel Base9.19 ft2.81 m
Engine
Displacement403 cu in6.7 L
Net Torque482 lb ft653.6 Nm
Peak Torque496 lb ft672.5 Nm
Bore4.2 in105 mm
Stroke5 in127 mm
Rated Net Power128 hp95.5 kw
Sae J1349 (2)138 hp103 kw
Iso 9249 (1997) (2)139 hp103.7 kw
Eec 80/1269 (2)139 hp103.7 kw
Sae J1349 (1)128 hp95.5 kw
Iso 9249 (1997) (1)130 hp97 kw
Eec 80/1269 (1)130 hp97 kw
Maximum Net Power - 1800 Rpm138 hp103 kw
Operational
Operating Weight24180 lb10967.9 kg
Steering
Steering Angle - Each Direction40 degrees40 degrees
Minimum Turning Radius - Over Tires200 in5080 mm
Steering Cylinder, Two, Bore2.8 in69.9 mm
Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi)27 gal/min27 gal/min
Maximum Working Pressure3000 psi3000 psi
Steering Articulation40 degrees40 degrees
Transmission
Forward - 1 (1)4.2 mph6.8 km/h
Reverse - 1 (1)4.2 mph6.8 km/h
Forward - 1 (2)2.3 mph3.8 km/h
2 (2)4.7 mph7.6 km/h
3 (2)12.2 mph19.7 km/h
4 (2)24.2 mph39 km/h
Reverse - 1 (2)2.5 mph4.1 km/h
2 (3)5 mph8.1 km/h
3 (3)13.2 mph21.3 km/h
2 (1)7.6 mph12.3 km/h
3 (1)13.5 mph21.8 km/h
4 (1)23.9 mph38.5 km/h
Standard Transmission Maximum Travel Speeds23.9 mph38.5 km/h
Optional Low Speed Transmission Maximum Travel Speeds24.2 mph39 km/h
Tires
Tread Width6.2 ft1.9 m
Size20.5 R25 Radial (L-3)20.5 R25 Radial (L-3)
Buckets
Bucket Capacities1.7 m3 - 2.1 m3 2.2 yd3 - 2.7 yd31.7 m3 - 2.1 m3 2.2 yd3 - 2.7 yd3
Operating Specifications
Static Tipping Load - Full Turn16844 lb7640.4 kg
Articulation Angle40 degrees40 degrees
Reach - Full Lift And 45 Degrees Dump2.6 ft0.8 m
Dump Clearance At Full Lift And 45 Degrees Dump Angle9.3 ft2.9 m
Service Refill Capacities
Cooling System8.5 gal32.2 L
Fuel Tank59.4 gal224.9 L
Crankcase4.4 gal16.7 L
Hydraulic Tank18.5 gal70.1 L
Hydraulic System - Including Tank33 gal125 L
Transmission6.1 gal23.1 L
Front5.5 gal20.9 L
Rear5.5 gal20.9 L
Cab
RopsSAE J1040 MAY94, ISO 3471-1994SAE J1040 MAY94, ISO 3471-1994
FopsSAE J231 JAN81, ISO 3449-1992 Level IISAE J231 JAN81, ISO 3449-1992 Level II
Loader Hydraulic System
Pump Flow - Implement Pump40.15 gal/min40.15 gal/min
Output At 2,300 Engine Rpm And 6900 Kpa (1000 Psi) With Sae 10w Oil At 65 Degreesc (150 Degreesf)39.5 gal/min39.5 gal/min
Maximum Working Pressure3755 psi3755 psi
Raise5.2 s5.2 s
Dump1.1 s1.1 s
Lower, Empty, Float Down2.7 s2.7 s
Total9 s9 s
Bore (1)4.3 in108 mm
Stroke (1)29.7 in754.4 mm
Bore (2)4.8 in120.7 mm
Stroke (2)20.5 in520.7 mm
Hydraulic Cycle Time9 Seconds9 Seconds
Relief Pressure - Implement Pump3755 psi3755 psi
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.