- Ground Clearance: 9.06 in / 230 mm
- Wheelbase: 5.84 ft / 1780 mm
- Dump Angle: 42 degrees
- Dump Height: 7.52 ft / 2290 mm
Published dimensions and weight
Volvo MCT85C
The Volvo MCT85C is a skid steer loader of about 3.8 t, built around the KDI 2054 TCR engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Weight8355.6 lb3790 kg
03Selected published values62
Skid-steer loaders are commonly used for loading, material handling and attachment work in confined areas. Published rows for Volvo MCT85C include published engine power of 45.1 hp / 33.7 kw, the published “Ground Clearance” field of 9.06 in / 230 mm, the published “Wheelbase” field of 5.84 ft / 1780 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Ground Clearance” field (9.06 in / 230 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (5.84 ft / 1780 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Dump Angle” field (42 degrees) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Ground Clearance9.06 in230 mm
Wheelbase5.84 ft1780 mm
Dump Angle42 degrees42 degrees
Dump Height7.52 ft2290 mm
Dump Reach33.47 in850 mm
Height To Hinge Pin118.9 in3020 mm
Angle Of Departure27 degrees27 degrees
Overall Length (L/Bucket)9.13 ft2780 mm
Overall Length (W/Bucket)11.59 ft3530 mm
Turning Radius5.42 ft1650 mm
Turning Radius Front L/Bucket3.75 ft1140 mm
Turning Radius Front W/Bucket6.86 ft2090 mm
Overall Height6.57 ft2000 mm
Attachment Roll Back Angle30 degrees30 degrees
Speeds
Single Speed10 mph16.1 km/h
Two Speed5.6 mph9 km/h
Engine
Starter5.7 hp4.2 kw
Gross Horsepower – Sae J199546 hp34.4 kw
Battery12 - 109 (V - Ah)12 - 109 (V - Ah)
Number Of Cylinders44
Engine ModelKDI 2054 TCRKDI 2054 TCR
Net Power45.1 hp33.7 kw
Max Torque221.3 lb ft300 Nm
AspirationTurboTurbo
Fuel TypeDieselDiesel
Displacement151.4 cu in2.5 L
Alternator342000 amps342000 amps
Capacities
Hydraulic Oil Reservoir6.9 gal26 L
Engine Oil W/ Filter Change2.6 gal9.8 L
Fuel Tank24.4 gal92 L
Cooling System2.7 gal10 L
Tipping Load5427.8 lb2462 kg
Hydraulic System11.5 gal43.5 L
Performance
Rated Operating Load, 35% Tip1900.4 lb862 kg
Lift Arm PathVerticalVertical
Rated Operating Capacity (Iso 14397)3000.5 lb1361 kg
Curl1.4 sec1.4 sec
Dump1.8 sec1.8 sec
Raise (Lifting)5.1 sec5.1 sec
Lower (Power Down)3.5 sec3.5 sec
Loader
Standard Hydraulic Pump Output18.5 gal/min70 L/min
High Flow Pump Output26.5 gal/min100 L/min
System Pressure230 psi1585.8 kPa
Bucket Width72.1 in1829 mm
Weights
Weight8355.6 lb3790 kg
Bucket
Multi Purpose Bucket Width5.5 ft1676 mm
General Purpose Bucket Width5.5 ft1676 mm
Breakout Force, Curl6543.4 lb2968 kg
Breakout Force, Lift3461.3 lb1570 kg
Landscape Bucket Width5.5 ft1676 mm
General Purpose Bucket Length2.7 ft800 mm
Landscape Bucket Length3.2 ft953 mm
Multi Purpose Bucket Length3.2 ft953 mm
General Purpose Bucket Height1.8 ft521 mm
Landscape Bucket Height1.8 ft521 mm
Multi Purpose Bucket Height2.3 ft701 mm
Landscape Bucket Weight0.4 in2217 mm2
General Purpose Bucket Weight441 lb200 kg
Multi Purpose Bucket Weight571 lb259 kg
Multi Purpose Bucket Heaped Cap0.6 yd30.5 m3
Landscape Bucket Heaped Cap0.7 yd30.5 m3
General Purpose Bucket Heaped Cap0.6 yd30.4 m3
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.