- Min Height @ Max Raise Angle: 47 ft / 14.33 m
- Max Height @ Max Raise Angle - No Jib: 149.61 ft / 45.6 m
- Min Operating Radius: 10 ft / 3.05 m
- Max Elevating Angle: 80 degrees
Published dimensions and weight
Link-Belt RTC8080 Series II
The Link-Belt RTC8080 Series II is a rough terrain crane of about 36.8 t, built around the C6.6 engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight81125.7 lb36798 kg
03Selected published values41
Rough-terrain cranes are commonly used for lifting on construction and industrial sites with unpaved travel surfaces. Published rows for Link-Belt RTC8080 Series II include published operating weight of 81125.7 lb / 36798 kg, published engine power of 270 hp / 201.4 kw, the published “Min Height @ Max Raise Angle” field of 47 ft / 14.33 m. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Min Height @ Max Raise Angle” field (47 ft / 14.33 m) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Max Height @ Max Raise Angle - No Jib” field (149.61 ft / 45.6 m) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Min Operating Radius” field (10 ft / 3.05 m) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Boom
Min Height @ Max Raise Angle47 ft14.33 m
Max Height @ Max Raise Angle - No Jib149.61 ft45.6 m
Min Operating Radius10 ft3.05 m
Max Elevating Angle80 degrees80 degrees
Max Operating Radius130 ft39.63 m
Number Of Sections55
Max Lift Capacity160000 lb72574.79 kg
Swing Speed1.9 rpm1.9 rpm
Dimensions
Transport Length50.5 ft15390 mm
Transport Width9.55 ft2910 mm
Transport Height12.96 ft3950 mm
Wheelbase172.05 in4370 mm
Ground Clearance1.55 ft470 mm
Width W/ Outriggers Extended23.99 ft7310 mm
Carrier/Base Length27.14 ft8270 m
Upper Structure Tail Swing Radius13.82 ft4210 mm
Engine
Number Of Cylinders66
Engine MakeCummins QSBCummins QSB
Engine ModelC6.6C6.6
Emissions ComplianceTier 4F / Stage IVTier 4F / Stage IV
Gross Power270 hp201.4 kw
Power Measured @2000 rpm2000 rpm
Max Torque730.2 lb ft990 Nm
Torque Measured @1500 rpm1500 rpm
Displacement408.9 cu in6.7 L
Bore4.3 in107 mm
Stroke4.9 in124 mm
Crankcase Capacity14.2 L14.2 L
Operational
Def Tank Capacity5 gal19 L
Operating Weight81125.7 lb36798 kg
Fuel Capacity75 gal284 L
Hydraulic System Fluid Capacity153.1 gal579.2 L
Engine Oil Capacity4.6 gal17.4 L
Operating Voltage12 V12 V
Alternator Supplied Amperage160 amps160 amps
Tire Size29.5x2529.5x25
Transmission
Transmission TypePowershiftPowershift
Number Of Forward Gears66
Number Of Reverse Gears66
Max Speed - Forward17.1 mph27.4 km/h
Max Speed - Reverse17.1 mph27.4 km/h
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.