- Overall Length: 30.85 ft / 9402 mm
- Width Over Tires: 7.94 ft / 2419 mm
- Wheelbase: 18.63 ft / 5676 mm
- Rear Ground Clearance: 1.56 ft / 474 mm
Published dimensions and weight
Terex TG150
The Terex TG150 is a motor grader powered by a 163 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total31967.1 lb14500 kg
03Selected published values51
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Terex TG150 include published moldboard width of 12.1 ft / 3660 mm, published maximum power of 163 hp / 121.6 kw, published operating weight of 31967.1 lb / 14500 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (30.85 ft / 9402 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (7.94 ft / 2419 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (18.63 ft / 5676 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length30.85 ft9402 mm
Width Over Tires7.94 ft2419 mm
Wheelbase18.63 ft5676 mm
Rear Ground Clearance1.56 ft474 mm
Tandem Axle Wheelbase5.11 ft1555 mm
Front Ground Clearance1.8 ft546 mm
Blade Base7.24 ft2204 mm
Height To Top Of Isomount Cab10.75 ft3276 mm
Engine
Number Of Cylinders66
Engine Make23472347
Power Measured @2200 rpm2200 rpm
Net Power Gear 5-6163 hp121.6 kw
Max Power163 hp121.6 kw
Displacement366.2 cu in6 L
Aspirationturbochargedturbocharged
Operational
Std Operation Weight - Front Axle9479.9 lb4300 kg
Hydraulic System Fluid Capacity39.7 gal150 L
Std Operation Weight - Rear Axle22487.2 lb10200 kg
Std Operation Weight - Total31967.1 lb14500 kg
Fuel Capacity81.9 gal310 L
Cooling System Fluid Capacity11.9 gal45 L
Transmission Fluid Capacity4.8 gal18 L
Rear Diff/Final Drive Fluid Capacity4 gal15 L
Circle Gearbox Fluid Capacity1.6 gal6 L
Tandem Case Fluid Capacity (Each)10.6 gal40 L
Tire Size13.00 -24 TG SGG-2A Goodyear13.00 -24 TG SGG-2A Goodyear
Operating Voltage24 V24 V
Alternator Supplied Amperage55 amps55 amps
Steering
Articulation Angle45 degrees45 degrees
Turning Radius22.7 ft6.9 m
Transmission
Transmission TypeAuto Power Shift Tansmission With torque ConverterAuto Power Shift Tansmission With torque Converter
Number Of Gears - Forward66
Number Of Gears - Reverse33
Max Speed - Forward24.9 mph40 km/h
Max Speed - Reverse15.6 mph25 km/h
Front Axle
Wheel Lean17 degrees17 degrees
Oscillation - Total15 degrees15 degrees
Ground Clearance1.8 ft546 mm
Moldboard
Moldboard Width12.1 ft3660 mm
Moldboard Height22.9 in580 mm
Moldboard Thickness0.8 in20 mm
Side Shift Left49.3 in1250 mm
Side Shift Right49.3 in1250 mm
Blade Pull At Max Weight17994 lb8162 kg
Hydraulic System
Pump TypeAxial Piston PumpAxial Piston Pump
Pump Flow26.2 gal/min99 L/min
Relief Valve Pressure2669 psi18402.1 kPa
Circle
Diameter53.1 in1348 mm
Max Reach Outside Tires - Left98.5 in2500 mm
Max Reach Outside Tires - Right125.2 in3180 mm
Max Lift Above Ground18.9 in480 mm
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.