- Overall Length: 34.7 ft / 10575 mm
- Width Over Tires: 8.63 ft / 2630 mm
- Wheelbase: 21.26 ft / 6480 mm
- Tandem Axle Wheelbase: 5.01 ft / 1525 mm
Published dimensions and weight
Komatsu GD675-5
The Komatsu GD675-5 is a motor grader powered by a 136 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total35174.8 lb15955 kg
03Selected published values62
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Komatsu GD675-5 include published moldboard width of 14.2 ft / 4320 mm, published operating weight of 35174.8 lb / 15955 kg, the published “Overall Length” field of 34.7 ft / 10575 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (34.7 ft / 10575 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.63 ft / 2630 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (21.26 ft / 6480 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length34.7 ft10575 mm
Width Over Tires8.63 ft2630 mm
Wheelbase21.26 ft6480 mm
Tandem Axle Wheelbase5.01 ft1525 mm
Blade Base8.47 ft2580 mm
Height To Top Of Isomount Cab10.5 ft3200 mm
Engine
Torque694.1 lb ft941 Nm
Number Of Cylinders66
Gross Power Gear 1-3136 hp101.5 kw
Gross Power Gear 4-6151 hp112.7 kw
Gross Power Gear 7-8165 hp123.1 kw
Net Power Gear 1-3134 hp100 kw
Net Power Gear 4-6149 hp111.2 kw
Engine MakeKOMATSUKOMATSU
Engine ModelSAA6D107E-1SAA6D107E-1
Power Measured @2000 rpm2000 rpm
Torque Measured @1450 rpm1450 rpm
Net Power Gears 7-8163 hp121.6 kw
Bore4.3 in107 mm
Stroke4.9 in124 mm
AspirationTurbochargedTurbocharged
Operational
Std Operation Weight - Front Axle9645.3 lb4375 kg
Std Operation Weight - Rear Axle25529.6 lb11580 kg
Hydraulic System Fluid Capacity18.3 gal69 L
Std Operation Weight - Total35174.8 lb15955 kg
Fuel Capacity109.9 gal416 L
Cooling System Fluid Capacity7.8 gal29.4 L
Transmission Fluid Capacity11.9 gal45 L
Rear Diff/Final Drive Fluid Capacity4.5 gal17 L
Circle Gearbox Fluid Capacity1.9 gal7 L
Tandem Case Fluid Capacity (Each)15.1 gal57 L
Tire Size17.5R2517.5R25
Operating Voltage24 V24 V
Alternator Supplied Amperage60 amps60 amps
Steering
Articulation Angle25 degrees25 degrees
Turning Radius24.3 ft7.4 m
Transmission
Transmission TypeFull power shift transmissionFull power shift transmission
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward27.5 mph44.3 km/h
Max Speed - Reverse25 mph40.3 km/h
Front Axle
Wheel Lean16 degrees16 degrees
Oscillation - Total32 degrees32 degrees
Ground Clearance2.1 ft620 mm
Moldboard
Moldboard Width14.2 ft4320 mm
Moldboard Height25.4 in645 mm
Moldboard Thickness0.8 in19 mm
Max Depth Of Cut24.3 in615 mm
Side Shift Left44.3 in1125 mm
Side Shift Right44.3 in1125 mm
Hydraulic System
Pump TypeLoad-sensing closed center hydraulicsLoad-sensing closed center hydraulics
Pump Flow52.9 gal/min200 L/min
Relief Valve Pressure435.2 psi3000 kPa
Circle
Diameter60.3 in1530 mm
Rotation360 degrees360 degrees
Shift Left23.3 in590 mm
Shift Right23.3 in590 mm
Max Reach Outside Tires - Left98.5 in2500 mm
Max Reach Outside Tires - Right98.5 in2500 mm
Max Lift Above Ground18.9 in480 mm
Blade Tip Angle - Front40 degrees40 degrees
Blade Tip Angle - Rear5 degrees5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.