- Overall Length: 27.96 ft / 8521 mm
- Width Over Tires: 8.34 ft / 2540 mm
- Wheelbase: 5.05 ft / 1538 mm
- Rear Ground Clearance: 1.09 ft / 331 mm
Published dimensions and weight
Fiat-Hitachi FG105
The Fiat-Hitachi FG105 is a motor grader built around the 6 CT8.3 engine (197.2 hp).
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02WeightNot publishedNot published
03Selected published values57
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Fiat-Hitachi FG105 include published moldboard width of 9.1 ft / 2762 mm, published maximum power of 197.2 hp / 147 kw, the published “Overall Length” field of 27.96 ft / 8521 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (27.96 ft / 8521 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.34 ft / 2540 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (5.05 ft / 1538 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length27.96 ft8521 mm
Width Over Tires8.34 ft2540 mm
Wheelbase5.05 ft1538 mm
Rear Ground Clearance1.09 ft331 mm
Tandem Axle Wheelbase19.59 ft5969 mm
Front Ground Clearance2.09 ft635 mm
Blade Base8.67 ft2642 mm
Height To Top Of Isomount Cab10.96 ft3340 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine Model6 CT8.36 CT8.3
Power Measured @2300 rpm2300 rpm
Net Power Gear 5-6197.2 hp147 kw
Torque Measured @1500 rpm1500 rpm
Max Power197.2 hp147 kw
Net Torque Gears 7-8555.4 lb ft753 Nm
Displacement506.5 cu in8.3 L
Aspirationturbochargedturbocharged
Operational
Hydraulic System Fluid Capacity25 gal94.6 L
Max Operation Weight - Front Axle9281.5 lb4210 kg
Max Operation Weight - Rear Axle25110.7 lb11390 kg
Oil System Fluid Capacity5.4 gal20.3 L
Max Operation Weight - Total34392.2 lb15600 kg
Fuel Capacity79 gal299 L
Cooling System Fluid Capacity7.2 gal27 L
Transmission Fluid Capacity6.7 gal25 L
Rear Diff/Final Drive Fluid Capacity11.1 gal42 L
Circle Gearbox Fluid Capacity0.8 gal2.8 L
Tandem Case Fluid Capacity (Each)8.1 gal30.3 L
Tire Size13X24(10PR)13X24(10PR)
Operating Voltage24 V24 V
Alternator Supplied Amperage45 amps45 amps
Steering
Articulation Angle25 degrees25 degrees
Turning Radius32.8 ft10 m
Transmission
Transmission Typefull powershiftfull powershift
Number Of Gears - Forward66
Number Of Gears - Reverse33
Max Speed - Forward26.1 mph42 km/h
Max Speed - Reverse17.1 mph27.4 km/h
Front Axle
Wheel Lean17.5 degrees17.5 degrees
Oscillation - Total19 degrees19 degrees
Ground Clearance2.1 ft635 mm
Moldboard
Moldboard Width9.1 ft2762 mm
Moldboard Height37.6 in953 mm
Max Depth Of Cut6.5 in165 mm
Side Shift Left21 in533 mm
Side Shift Right27 in685 mm
Blade Down Pressure17174.1 lb7790 kg
Hydraulic System
Pump Typefull hydraulic, variable displacementfull hydraulic, variable displacement
Pump Flow43.1 gal/min163 L/min
Relief Valve Pressure414.4 psi2857 kPa
Circle
Diameter69.1 in1753 mm
Rotation360 degrees360 degrees
Max Reach Outside Tires - Left69.3 in1759 mm
Max Reach Outside Tires - Right81 in2057 mm
Max Lift Above Ground24.5 in622 mm
Blade Tip Angle - Rear27.5 degrees27.5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.