- Overall Length: 33.13 ft / 10097 mm
- Width Over Tires: 8.08 ft / 2460 mm
- Wheelbase: 20.24 ft / 6169 mm
- Tandem Axle Wheelbase: 5 ft / 1523 mm
Published dimensions and weight
Caterpillar 160H
Rated at 200 hp, the Caterpillar 160H is a motor grader.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total35891.3 lb16280 kg
03Selected published values58
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Caterpillar 160H include published moldboard width of 14 ft / 4267 mm, published maximum power of 200 hp / 149.2 kw, published operating weight of 35891.3 lb / 16280 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (33.13 ft / 10097 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.08 ft / 2460 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.24 ft / 6169 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length33.13 ft10097 mm
Width Over Tires8.08 ft2460 mm
Wheelbase20.24 ft6169 mm
Tandem Axle Wheelbase5 ft1523 mm
Height To Top Of Isomount Cab11.02 ft3356 mm
Engine
Number Of Cylinders66
Net Power Gear 4-6200 hp149.2 kw
Engine Make22362236
Engine Model3176C ATAAC3176C ATAAC
Net Power Gear 1-2180 hp134.3 kw
Power Measured @2000 rpm2000 rpm
Net Power Gear 5-6200 hp149.2 kw
Torque Measured @1000 rpm1000 rpm
Max Power200 hp149.2 kw
Net Power Gears 7-8200 hp149.2 kw
Net Torque Gears 7-8840.9 lb ft1140 Nm
Displacement628.6 cu in10.3 L
Operational
Std Operation Weight - Front Axle10117.1 lb4589 kg
Std Operation Weight - Rear Axle25774.3 lb11691 kg
Hydraulic System Fluid Capacity21.2 gal80 L
Std Operation Weight - Total35891.3 lb16280 kg
Max Operation Weight - Front Axle18322.7 lb8311 kg
Max Operation Weight - Rear Axle33003.2 lb14970 kg
Max Operation Weight - Total51325.9 lb23281 kg
Fuel Capacity104.9 gal397 L
Cooling System Fluid Capacity10.1 gal38 L
Rear Diff/Final Drive Fluid Capacity12.5 gal47 L
Circle Gearbox Fluid Capacity1.9 gal7 L
Tandem Case Fluid Capacity (Each)17 gal64 L
Tire Size10-24 12PR10-24 12PR
Operating Voltage24 V24 V
Alternator Supplied Amperage35 amps35 amps
Steering
Articulation Angle20 degrees20 degrees
Turning Radius24.3 ft7.4 m
Transmission
Number Of Gears - Forward88
Number Of Gears - Reverse66
Max Speed - Forward27.1 mph43.6 km/h
Max Speed - Reverse21.4 mph34.4 km/h
Front Axle
Wheel Lean18 degrees18 degrees
Oscillation - Total32 degrees32 degrees
Moldboard
Moldboard Width14 ft4267 mm
Moldboard Height27.1 in686 mm
Moldboard Thickness1 in25 mm
Max Depth Of Cut30.4 in770 mm
Side Shift Left33.6 in851 mm
Side Shift Right37.2 in943 mm
Blade Pull At Max Weight44249 lb20071 kg
Blade Down Pressure30441.5 lb13808 kg
Hydraulic System
Pump TypeAxial PistonAxial Piston
Pump Flow68.7 gal/min260 L/min
Relief Valve Pressure3502.7 psi24150 kPa
Circle
Shift Left33.4 in848 mm
Shift Right34.7 in881 mm
Max Reach Outside Tires - Left87.6 in2223 mm
Max Reach Outside Tires - Right89.1 in2261 mm
Max Lift Above Ground17.8 in452 mm
Blade Tip Angle - Front40 degrees40 degrees
Blade Tip Angle - Rear5 degrees5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.