- Net Power Gears 7-8: 243 hp / 181.3 kw
- Std Operation Weight - Front Axle: 9684 lb / 4392.6 kg
- Std Operation Weight - Rear Axle: 30227 lb / 13710.8 kg
- Std Operation Weight - Total: 39911 lb / 18103.4 kg
Published dimensions and weight
Caterpillar 140M2 AWD
The Caterpillar 140M2 AWD is a motor grader built around the C9.3 ACERT VHP engine (243 hp).
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total39911 lb18103.4 kg
03Selected published values58
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Caterpillar 140M2 AWD include published moldboard width of 12 ft / 3657.6 mm, published operating weight of 39911 lb / 18103.4 kg, the published “Overall Length” field of 29.2 ft / 8898 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Net Power Gears 7-8” field (243 hp / 181.3 kw) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Std Operation Weight - Front Axle” field (9684 lb / 4392.6 kg) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Std Operation Weight - Rear Axle” field (30227 lb / 13710.8 kg) with the specific machine's configuration and records; options and condition can differ.
What changes with this option
Compared with the base Caterpillar 140M2: 4 of 58 published specifications change.
| Section | Specification | Caterpillar 140M2 | Caterpillar 140M2 AWD |
|---|---|---|---|
| Engine | Net Power Gears 7-8 | 223 hp / 166.3 kw | 243 hp / 181.3 kw |
| Operational | Std Operation Weight - Front Axle | 9284 lb / 4211.2 kg | 9684 lb / 4392.6 kg |
| Operational | Std Operation Weight - Rear Axle | 28627 lb / 12985 kg | 30227 lb / 13710.8 kg |
| Operational | Std Operation Weight - Total | 37911 lb / 17196.2 kg | 39911 lb / 18103.4 kg |
Not published for this option: Pry-Out Force, Ripping Depth - Maximum, Ripper Shank Holders, Penetration Force, Machine Length Increase, Beam Raised, Ripper Shank Holder Spacing, Number Of Cylinders, Bore, Stroke, Emissions, Derating Altitude, Maximum Torque, Base Power (1st Gear) - Net, Standard Capability, Speed At Rated Power, High - Ambient Capability, Base Power (1st Gear) - Net - Metric, High Ambient - Fan Speed - Maximum, High Ambient - Fan Speed - Standard, High Ambient - Fan Speed - Minimum, Vhp Plus Range - Net, Vhp Plus Range - Net - Metric, Vhp Plus - Gear 1f, Net, Vhp Plus - Gear 2f, Net, Vhp Plus - Gear 3f, Net, Vhp Plus - Gear 4f, Net, Vhp Plus - Gear 5f, Net, Vhp Plus - Gear 6f, Net, Vhp Plus - Gear 7f, Net, Vhp Plus - Gear 8f, Net, Front Frame Structure - Height, Front Frame Structure - Width, Circle - Diameter, Drawbar - Height, Front Axle - Height To Center, Circle - Blade Beam Thickness, Front Axle - Total Oscillation Per Side, Drawbar - Thickness, Drawbar - Width, Front-Top/Bottom Plate - Width, Front-Top/Bottom Plate - Thickness, Front Axle - Wheel Lean - Left/Right, Brakes - Parking, Brakes - Service, Transmission, Forward/Reverse Gears, Brakes - Secondary, Brakes - Service - Surface Area, Operating Weight - Typically Equipped, Gross Vehicle Weight - Base - Total, Gross Vehicle Weight - Maximum - Total, Operating Weight - Typically Equipped - Total, Gross Vehicle Weight - Base - Rear Axle, Operating Weight - Typically Equipped - Front Axle, Operating Weight - Typically Equipped - Rear Axle, Gross Vehicle Weight - Base - Front Axle, Gross Vehicle Weight - Maximum - Front Axle, Gross Vehicle Weight - Maximum - Rear Axle, Standby Pressure, Maximum System Pressure, Circuit Type, Pump Output, Reservoir Tank Capacity, Blade Width, Arc Radius, Throat Clearance, Cutting Edge Width, Cutting Edge Thickness, End Bit - Width, End Bit - Thickness, Moldboard - Height, Moldboard - Thickness, Blade Pull - Maximum Gvw, Blade Pull - Base Gvw, Blade Down Pressure - Base Gvw, Blade Down Pressure - Maximum Gvw, Top Speed - Forward, Top Speed - Reverse, Turning Radius - Outside Front Tires, Steering Range - Left/Right, Articulation Angle - Left/Right, Forward - 8th, Forward - 7th, Forward - 6th, Forward - 5th, Forward - 4th, Forward - 3rd, Forward - 2nd, Forward - 1st, Reverse - 6th, Reverse - 5th, Reverse - 4th, Reverse - 3rd, Reverse - 2nd, Reverse - 1st, Brakes, Rops/Fops, Sound, Steering, Cooling System, Hydraulic System - Total, Engine Oil, Hydraulic System - Tank, Tandem Housing - Each, Circle Drive Housing, Front Wheel Spindle Bearing Housing, Fuel Capacity, Transmission - Differential - Final Drives, Circle Centershift - Right, Circle Centershift - Left, Moldboard Sideshift - Right, Moldboard Sideshift - Left, Blade Tip Range - Forward, Blade Tip Range - Backward, Maximum Shoulder Reach Outside Of Tires - Right, Maximum Shoulder Reach Outside Of Tires - Left, Maximum Lift Above Ground, Maximum Depth Of Cut, Maximum Blade Position Angle, Front, V-Type - Working Width, Rear - Scarifier Shank Holders, Mid, V-Type - Scarifier Shank Holders, Front, V-Type, 5 Or 11 Tooth - Working Width, Front, V-Type, 5 Or 11 Tooth - Scarifying Depth, Maximum, Front, V-Type, 5 Or 11 Tooth - Scarifier Shank Holders, Front, V-Type, 5 Or 11 Tooth - Scarifier Shank Holder Spacing, Mid, V-Type - Working Width, Mid, V-Type - Scarifying Depth, Maximum, Mid, V-Type - Scarifier Shank Holder Spacing, Rear - Working Width, Rear - Scarifying Depth, Maximum, Rear - Scarifier Shank Holder Spacing, Front, V-Type - Scarifying Depth, Maximum, Front, V-Type - Scarifier Shank Holders, Front, V-Type - Scarifier Shank Holder Spacing, Rear - Ripping Depth, Maximum, Height, Width, Sidewall Thickness - Inner, Sidewall Thickness - Outer, Drive Chain Pitch, Wheel Axle Spacing, Tandem Oscillation - Front Up, Tandem Oscillation - Front Down
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.