- Overall Length: 28.58 ft / 8713 mm
- Width Over Tires: 8.08 ft / 2464 mm
- Wheelbase: 20.24 ft / 6169 mm
- Rear Ground Clearance: 1.13 ft / 344 mm
Published dimensions and weight
Caterpillar 140H
The Caterpillar 140H is a motor grader built around the 3176C DITA ATAAC VHP engine (185 hp).
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total32357 lb14677 kg
03Selected published values59
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Caterpillar 140H include published moldboard width of 12 ft / 3658 mm, published maximum power of 185 hp / 138 kw, published operating weight of 32357 lb / 14677 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (28.58 ft / 8713 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.08 ft / 2464 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.24 ft / 6169 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length28.58 ft8713 mm
Width Over Tires8.08 ft2464 mm
Wheelbase20.24 ft6169 mm
Rear Ground Clearance1.13 ft344 mm
Tandem Axle Wheelbase5 ft1523 mm
Front Ground Clearance1.96 ft600 mm
Blade Base8.4 ft2561 mm
Height To Top Of Isomount Cab10.25 ft3131 mm
Engine
Number Of Cylinders66
Net Power Gear 4-6185 hp138 kw
Engine Make22362236
Engine Model3176C DITA ATAAC VHP3176C DITA ATAAC VHP
Net Power Gear 1-2165 hp123 kw
Power Measured @2000 rpm2000 rpm
Net Power Gear 5-6185 hp138 kw
Max Power185 hp138 kw
Net Power Gears 7-8185 hp138 kw
Displacement629 cu in10.3 L
Operational
Std Operation Weight - Front Axle9123 lb4138 kg
Hydraulic System Fluid Capacity20.8 gal80 L
Std Operation Weight - Rear Axle23234 lb10539 kg
Std Operation Weight - Total32357 lb14677 kg
Max Operation Weight - Front Axle16733 lb7590 kg
Max Operation Weight - Rear Axle30139 lb13671 kg
Max Operation Weight - Total46872 lb21261 kg
Fuel Capacity105 gal397 L
Cooling System Fluid Capacity10 gal38 L
Rear Diff/Final Drive Fluid Capacity12.4 gal47 L
Circle Gearbox Fluid Capacity1.8 gal7 L
Tandem Case Fluid Capacity (Each)16.9 gal64 L
Steering
Articulation Angle20 degrees20 degrees
Turning Radius24.6 ft7.5 m
Transmission
Transmission Typedirect drive, power shiftdirect drive, power shift
Number Of Gears - Forward88
Number Of Gears - Reverse66
Max Speed - Forward27.4 mph44 km/h
Max Speed - Reverse21.6 mph34.7 km/h
Front Axle
Wheel Lean18 degrees18 degrees
Oscillation - Total32 degrees32 degrees
Ground Clearance2 ft600 mm
Moldboard
Moldboard Width12 ft3658 mm
Moldboard Height24 in610 mm
Moldboard Thickness0.9 in22 mm
Max Depth Of Cut28.1 in715 mm
Side Shift Left20.6 in524 mm
Side Shift Right26 in660 mm
Blade Pull At Max Weight42184 lb19135 kg
Blade Down Pressure28697.6 lb13017 kg
Hydraulic System
Pump Typeaxial pistonaxial piston
Pump Flow54.4 gal/min206 L/min
Relief Valve Pressure3500 psi24150 kPa
Circle
Diameter60.2 in1530 mm
Shift Left27.4 in695 mm
Shift Right28.7 in728 mm
Max Reach Outside Tires - Left74.6 in1896 mm
Max Reach Outside Tires - Right77.9 in1978 mm
Max Lift Above Ground18.9 in480 mm
Blade Tip Angle - Front40 degrees40 degrees
Blade Tip Angle - Rear5 degrees5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.