- Overall Length: 33.02 ft / 10064 mm
- Width Over Tires: 7.89 ft / 2402 mm
- Wheelbase: 19.44 ft / 5923 mm
- Rear Ground Clearance: 1.16 ft / 351 mm
Published dimensions and weight
Caterpillar 135H
The Caterpillar 135H is a motor grader built around the 3126B DITA ATAAC VHP engine (155 hp).
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total28840 lb13081.7 kg
03Selected published values58
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Caterpillar 135H include published moldboard width of 12.1 ft / 3658 mm, published maximum power of 155 hp / 115.6 kw, published operating weight of 28840 lb / 13081.7 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (33.02 ft / 10064 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (7.89 ft / 2402 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (19.44 ft / 5923 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length33.02 ft10064 mm
Width Over Tires7.89 ft2402 mm
Wheelbase19.44 ft5923 mm
Rear Ground Clearance1.16 ft351 mm
Tandem Axle Wheelbase4.96 ft1510 mm
Front Ground Clearance1.16 ft351 mm
Blade Base8.52 ft2596 mm
Height To Top Of Isomount Cab10.94 ft3332 mm
Engine
Number Of Cylinders66
Net Power Gear 4-6155 hp115.6 kw
Engine Make22362236
Engine Model3126B DITA ATAAC VHP3126B DITA ATAAC VHP
Net Power Gear 1-2135 hp100.7 kw
Power Measured @2000 rpm2000 rpm
Net Power Gear 5-6155 hp115.6 kw
Torque Measured @1000 rpm1000 rpm
Max Power155 hp115.6 kw
Net Power Gears 7-8155 hp115.6 kw
Net Torque Gears 7-8625.5 lb ft848 Nm
Displacement439 cu in7.2 L
Operational
Std Operation Weight - Front Axle8242 lb3738.6 kg
Hydraulic System Fluid Capacity17.7 gal67.1 L
Std Operation Weight - Rear Axle20598 lb9343.1 kg
Std Operation Weight - Total28840 lb13081.7 kg
Fuel Capacity90 gal340.7 L
Cooling System Fluid Capacity10.4 gal39.4 L
Circle Gearbox Fluid Capacity1.8 gal6.9 L
Tandem Case Fluid Capacity (Each)12.7 gal48.1 L
Operating Voltage24 V24 V
Alternator Supplied Amperage35 amps35 amps
Steering
Articulation Angle20 degrees20 degrees
Turning Radius24 ft7.3 m
Transmission
Transmission Typedirect drive, powershiftdirect drive, powershift
Number Of Gears - Forward88
Number Of Gears - Reverse66
Max Speed - Forward26.1 mph42.1 km/h
Max Speed - Reverse20.6 mph33.2 km/h
Front Axle
Wheel Lean18 degrees18 degrees
Oscillation - Total32 degrees32 degrees
Ground Clearance2 ft608 mm
Moldboard
Moldboard Width12.1 ft3658 mm
Moldboard Height24.1 in610 mm
Moldboard Thickness0.9 in22 mm
Max Depth Of Cut30.6 in775 mm
Side Shift Left20.7 in524 mm
Side Shift Right26 in660 mm
Blade Pull At Max Weight25364.2 lb11505 kg
Blade Down Pressure21653.9 lb9822 kg
Hydraulic System
Pump TypeVariable PistonVariable Piston
Pump Flow38.1 gal/min144 L/min
Relief Valve Pressure3500 psi24131.7 kPa
Circle
Shift Left24.7 in625 mm
Shift Right24.8 in628 mm
Max Reach Outside Tires - Left72.5 in1840 mm
Max Reach Outside Tires - Right75.3 in1912 mm
Max Lift Above Ground18 in457 mm
Blade Tip Angle - Front40 degrees40 degrees
Blade Tip Angle - Rear5 degrees5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.