- Max Reach Along Ground: 23.71 ft / 7225 mm
- Minimum Front Swing Radius (No Offset): 8.93 ft / 2721 mm
- Minimum Front Swing Radius (Fully Offset): 8.1 ft / 2466 mm
- Max Digging Reach: 24.24 ft / 7387 mm
Published dimensions and weight
JCB 86c-1
The JCB 86c-1 is a mini excavator of about 6.6 t, built around the KDI 2504 TCR engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight14552.8 lb6601 kg
03Selected published values60
Mini excavators are commonly used for digging and utility work where access or working space is limited. Published rows for JCB 86c-1 include published operating weight of 14552.8 lb / 6601 kg, published engine power of 48 hp / 35.8 kw, the published “Max Reach Along Ground” field of 23.71 ft / 7225 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Max Reach Along Ground” field (23.71 ft / 7225 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Minimum Front Swing Radius (No Offset)” field (8.93 ft / 2721 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Minimum Front Swing Radius (Fully Offset)” field (8.1 ft / 2466 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Boom/Stick Option (Hex) 1
Max Reach Along Ground23.71 ft7225 mm
Minimum Front Swing Radius (No Offset)8.93 ft2721 mm
Minimum Front Swing Radius (Fully Offset)8.1 ft2466 mm
Max Digging Reach24.24 ft7387 mm
Maximum Height To Dipper Nose Pivot Pin20.87 ft6359 mm
Maximum Vertical Wallcut Depth10.8 ft3289 mm
Max.Dumping Height18.07 ft5506 mm
Maximum Digging Depth – Dozer Down14.84 ft4522 mm
Maximum Digging Depth – Dozer Up7.39 ft2250 mm
Dimensions
Length Of Track On Ground7.63 ft2325 mm
Ground Clearance1.15 ft350 mm
Height To Top Of Cab8.88 ft2706 mm
Tail Swing Radius4.89 ft1490 mm
Track Gauge6.07 ft1850 mm
Width Over Tracks7.55 ft2300 mm
Overall Width Of Superstructure7.18 ft2187 mm
Removal Counterweight Clearance2.5 ft762 mm
Transport Height- Minimum8877.96 ft2706 m
Transport Length, Minimum19137.14 ft5833 m
Cab Height61.19 in1554 mm
Undercarriage
Number Of Track Rollers Per Side55
Track TensionGreaseGrease
Tractive Effort143.31 lb65 kg
Engine
FuelDieselDiesel
Starter Motor2 KW2 KW
Engine ModelKDI 2504 TCRKDI 2504 TCR
Gross Power48 hp35.8 kw
Cooling SystemWater cooledWater cooled
Net Power45.4 hp33.9 kw
Power Measured @2200 rpm2200 rpm
Displacement152559.4 cu in2500 L
Torque Measured @1500 rpm1500 rpm
Alternator100 amps100 amps
Operational
Operating Weight14552.8 lb6601 kg
Fuel Capacity30.4 gal115 L
Cooling System Fluid Capacity3.2 gal12.1 L
Hydraulic System Fluid Capacity31.2 gal118 L
Engine Oil Capacity3 gal11.2 L
Operational Voltage12 V12 V
Hydraulic Pump Flow Capacity17.5 gal/min66 L/min
Performance
Travel Speed Low1.6 mph2.5 km/h
Travel Speed - High3.2 mph5 km/h
Gradeability30 %30 %
Blade
Approach Angle27.8 degrees27.8 degrees
Maximum Height1.6 ft471 mm
Dig Depth (Below Ground)1.6 ft461 mm
Reach In Front Of Tracks2.1 ft615 mm
Blade Width2320 mm2320 mm
Height18.7 in473 mm
Hydraulic System
Nominal Output41.9 gal/min158.4 L/min
Slew Main Relief226 lpm226 lpm
Excavator/Track Main Relief300 bar300 bar
Auxiliary Hydraulic Flow50.2 gal/min190 L/min
Boom
Boom Swing Left55 degrees55 degrees
Boom Swing Right60 degrees60 degrees
Bucket Rotation188 degrees188 degrees
Dipper Rotation122 degrees122 degrees
Bucket Tearout12836.6 lb57.1 kN
Dipper Tearout11218 lb49.9 kN
Slew Speed10 rpm10 rpm
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.