- Max Reach Along Ground: 17.44 ft / 5315 mm
- Minimum Front Swing Radius (No Offset): 8.18 ft / 2492 mm
- Maximum Digging Depth – Dozer Up: 10.43 ft / 3179 mm
- Maximum Height To Dipper Nose Pivot Pin: 13.16 ft / 4009 mm
Published dimensions and weight
JCB 8035 ZTS
The JCB 8035 ZTS is a 3.7 t-class mini excavator with a 30.5 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight8049.1 lb3651 kg
03Selected published values65
Mini excavators are commonly used for digging and utility work where access or working space is limited. Published rows for JCB 8035 ZTS include published operating weight of 8049.1 lb / 3651 kg, published engine power of 31.7 hp / 23.6 kw, published maximum speed of 2.68 mph / 4.3 km/h. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Max Reach Along Ground” field (17.44 ft / 5315 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Minimum Front Swing Radius (No Offset)” field (8.18 ft / 2492 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Maximum Digging Depth – Dozer Up” field (10.43 ft / 3179 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Boom/Stick Option (Hex) 1
Max Reach Along Ground17.44 ft5315 mm
Minimum Front Swing Radius (No Offset)8.18 ft2492 mm
Maximum Digging Depth – Dozer Up10.43 ft3179 mm
Maximum Height To Dipper Nose Pivot Pin13.16 ft4009 mm
Maximum Vertical Wallcut Depth7.11 ft2165 mm
Minimum Front Swing Radius (Fully Offset)5.35 ft1630 mm
Max Digging Reach17.84 ft5436 mm
Max.Dumping Height11.43 ft3482 mm
Maximum Digging Depth – Dozer Down11.53 ft3512 mm
Dimensions
Ground Clearance0.89 ft270 mm
Height To Top Of Cab7.99 ft2435 mm
Tail Swing Radius2.79 ft850 mm
Track Gauge4.76 ft1450 mm
Width Over Tracks5.75 ft1750 mm
Overall Width Of Superstructure5.44 ft1656 mm
Transport Height- Minimum7988.85 ft2435 m
Transport Length, Minimum14639.11 ft4462 m
Cab Height59.73 in1517 mm
Undercarriage
Tractive Effort70.55 lb32 kg
Number Of Track Rollers Per Side44
Max Travel Speed2.68 mph4.3 km/h
Track TensionGreaseGrease
Engine
FuelDieselDiesel
Starter Motor2 KW2 KW
Engine Model403D-I7403D-I7
Gross Power31.7 hp23.6 kw
Cooling SystemWater cooledWater cooled
Net Power30.5 hp22.7 kw
Power Measured @2200 rpm2200 rpm
Displacement101482.6 cu in1663 L
Max Torque70.8 lb ft96 Nm
Torque Measured @1600 rpm1600 rpm
Alternator65 amps65 amps
Operational
Operating Weight8049.1 lb3651 kg
Fuel Capacity10.6 gal40 L
Cooling System Fluid Capacity2.3 gal8.5 L
Hydraulic System Fluid Capacity18.5 gal70 L
Engine Oil Capacity1.2 gal4.5 L
Operational Voltage12 V12 V
Alternator Supplied Amperage55 amps55 amps
Hydraulic System Relief Valve Pressure3191 psi22001.2 kPa
Hydraulic Pump Flow Capacity26.9 gal/min101.9 L/min
Performance
Travel Speed Low1.5 mph2.4 km/h
Travel Speed - High2.7 mph4.3 km/h
Gradeability36 %36 %
Swing Mechanism
Swing Speed9.6 rpm9.6 rpm
Blade
Approach Angle24.5 degrees24.5 degrees
Maximum Height1.3 ft370 mm
Dig Depth (Below Ground)2.1 ft622 mm
Reach In Front Of Tracks2.3 ft681 mm
Blade Width16501650
Height13.2 in335 mm
Hydraulic System
Nominal Output29.1 gal/min110 L/min
Slew Main Relief190 bar190 bar
Excavator/Track Main Relief245 bar245 bar
Hydraulic Motor (Travel)PistonPiston
Auxiliary Hydraulic Flow18.3 gal/min69 L/min
Pump Type2 Variable & 1 Gear2 Variable & 1 Gear
Boom
Boom Swing Left45 degrees45 degrees
Boom Swing Right45 degrees45 degrees
Bucket Rotation186 degrees186 degrees
Dipper Rotation119 degrees119 degrees
Bucket Tearout6294.7 lb28 kN
Dipper Tearout3821.8 lb17 kN
Slew Speed9.6 rpm9.6 rpm
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.