The John Deere 8345RT is a MFWD tractor; its full manufacturer specification sheet appears below.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Unballasted Operating Weight34460 lb15630.8 kg
03Selected published values34
Published highlights
Wheelbase: 99 in / 2514.6 mm
Unballasted Operating Weight: 34460 lb / 15630.8 kg
Wheel Tread, Min. To Max. In. (Mm): "Standard: 1829-3048 mm 72-120 in. Optional: 2845-4064 mm 112-160 in."
Number Of Cylinders: 6
Typical use
Mechanical-front-wheel-drive tractors are commonly used for field work that benefits from added front-axle traction. Published rows for John Deere 8345RT include the published “Wheelbase” field of 99 in / 2514.6 mm, the published “Unballasted Operating Weight” field of 34460 lb / 15630.8 kg, the published “Wheel Tread, Min. To Max. In. (Mm)” field of "Standard: 1829-3048 mm 72-120 in. Optional: 2845-4064 mm 112-160 in.". These values describe the published configuration; verify the specific machine's configuration, attachments and records.
Buyer review notes
Compare the published “Wheelbase” field (99 in / 2514.6 mm) with the specific machine's configuration and records; options and condition can differ.
Compare the published “Unballasted Operating Weight” field (34460 lb / 15630.8 kg) with the specific machine's configuration and records; options and condition can differ.
Compare the published “Wheel Tread, Min. To Max. In. (Mm)” field ("Standard: 1829-3048 mm 72-120 in. Optional: 2845-4064 mm 112-160 in.") with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
01
Dimensions
Wheelbase99 in2514.6 mm
Unballasted Operating Weight34460 lb15630.8 kg
Wheel Tread, Min. To Max. In. (Mm)"Standard: 1829-3048 mm 72-120 in. Optional: 2845-4064 mm 112-160 in.""Standard: 1829-3048 mm 72-120 in. Optional: 2845-4064 mm 112-160 in."
02
Engine
Number Of Cylinders66
Engine ManufacturerJohn DeereJohn Deere
Cylinder LinersWetWet
Fuel Tank Capacity200 gal757.1 L
Displacement549 cu in9 L
AspirationVariable geometry turbocharger with air-to-air aftercooling and cooled exhaust gas recirculationVariable geometry turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation
03
Power Take-Off(Pto)
Standard"45 mm 1.75 in. 20 spline, 1000 rpm""45 mm 1.75 in. 20 spline, 1000 rpm"
Max Unballast Drwbr Hp (Kw) @ Eng Rpm266.8 hp199 kw
Maximum Torque (Pto)1039 lb ft1408.7 Nm
Official Pto Hp (Kw) @ Rated Rpm Hp (Kw)"Maximum @ Eng rpm At 1800 rpm: 237.77 kW 318.85 hp At 2096 rpm: 207.93 kW 278.85 hp""Maximum @ Eng rpm At 1800 rpm: 237.77 kW 318.85 hp At 2096 rpm: 207.93 kW 278.85 hp"
05
Transmission
Clutch, Wet/DryWetWet
CreeperIVTIVT
ReverserRight hand with IVTRight hand with IVT
On-The-Go Shifting (Yes/No/Partial)YesYes
06
Tires
Track Widths"Standard: 635 mm 25 in. Optional: 406 mm 16 in. 457 mm 18 in. 610 in. 24 762 mm 30 in.""Standard: 635 mm 25 in. Optional: 406 mm 16 in. 457 mm 18 in. 610 in. 24 762 mm 30 in."
07
Hydraulic
Maximum Operating Pressure2900 psi19994.8 kPa
Remote Control Valves Available"Four standard Three or five optional""Four standard Three or five optional"
Rated Flow @ One Scv35 gal/min132.5 L/min
Hitch Draft Control Load Sense TypeElectronicElectronic
Cab"Doors One on left sidePlatform - Flat/Straddle FlatdB(A) Rating 69.8 dBASeat Suspension System Air""Doors One on left sidePlatform - Flat/Straddle FlatdB(A) Rating 69.8 dBASeat Suspension System Air"
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.