- Load Height - Std: 7.71 ft / 2348 mm
- Reach From Swivel - Std: 11.1 ft / 3383 mm
- Dig Depth - Std: 8.37 ft / 2551 mm
- Reach At Load Height - Std: 5.88 ft / 1792 mm
Published dimensions and weight
JCB ICXT
The JCB ICXT is a loader backhoe powered by a 47 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02WeightNot publishedNot published
03Selected published values53
Loader backhoes are commonly used for digging, trenching, loading and general site work with one carrier. Published rows for JCB ICXT include published engine power of 49 hp / 36.6 kw, published hydraulic flow of 11.9 gal/min / 45 L/min, the published “Load Height - Std” field of 7.71 ft / 2348 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Load Height - Std” field (7.71 ft / 2348 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Reach From Swivel - Std” field (11.1 ft / 3383 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Dig Depth - Std” field (8.37 ft / 2551 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Backhoe
Load Height - Std7.71 ft2348 mm
Reach From Swivel - Std11.1 ft3383 mm
Dig Depth - Std8.37 ft2551 mm
Reach At Load Height - Std5.88 ft1792 mm
Reach – Ground Level To Slew Center11.09 ft3.38 m
Maximum Load Over Height7.71 ft2.35 m
Standard Max Dig Depth8.37 ft2549.99 mm
Reach – Ground Level To Rear Wheel Center13.92 ft4.24 m
Dimensions
Transport Length10.85 ft3307 mm
Transport Width4.7 ft1430 mm
Transport Height7.39 ft2252 mm
Wheelbase3.52 ft1070 mm
Ground Clearance0.85 ft258 mm
Rear Departure Angle2323
Height To Top Of Suspended Cab7.39 ft2252 mm
Approach Angle52 -52 degrees
Loader
Reach At Max Dump Height1.32 ft400 mm
Dig Depth1.97 in50 mm
Maximum Reach At Full Height_Long Arms2.43 ft0.74 m
Load Over Height_Long Arms8.7 ft2.65 m
Dump Height7.26 ft2.21 m
Electrical System
Pre-WireBeaconBeacon
GaugesFuel Level, Hour meterFuel Level, Hour meter
Front Working Lights2 adjustable2 adjustable
Rear Working Lights2 adjustable2 adjustable
Battery72A/hour72A/hour
Alternator50 amps50 amps
Engine
Emissions CertificationStage EC Stage IIIAStage EC Stage IIIA
Number Of Cylinders44
Rated Engine Speed2800 rpm2800 rpm
Gross Power49 hp36.6 kw
Net Power47 hp35.1 kw
Power Measured @2800 rpm2800 rpm
Torque Measured @2000 rpm2000 rpm
Fuel TypeReplaceable cartridge plus water/sediment separator prefilterReplaceable cartridge plus water/sediment separator prefilter
Net Max Torque103.3 lb ft140 Nm
AspirationNaturalNatural
Displacement134.3 cu in2.2 L
Capacities
Engine Oil With Filter2.6 gal9.6 L
Fuel Tank11.9 gal45 L
Cooling System2.2 gal8 L
Operational
Fixed Dipper_Long Arms9396.2 lb4262 kg
Extended Dipper_Long Arms9572.5 lb4342 kg
Tire Size Front - 2wd / 4wd10X16.510X16.5
Rear Tires Size 2wd/4wd10X16.510X16.5
Operating Voltage12 V12 V
Alternator Supplied Amperage50 amps50 amps
Transmission
Manufacturers DescriptionDanfoss / RexrothDanfoss / Rexroth
Transmission TypeHydrostaticHydrostatic
Max Speed - Forward4.7 mph7.5 km/h
Max Speed Reverse4.7 mph7.5 km/h
Hydraulic
Pump Flow Capacity11.9 gal/min45 L/min
Relief Valve Pressure3000 psi20684.3 kPa
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.