- Length W/ Bucket On Ground: 20.94 ft / 6380 mm
- Width Over Tires: 7.03 ft / 2140 mm
- Height To Top Of Cab: 9.88 ft / 3010 mm
- Wheelbase: 9.03 ft / 2750 m
Published dimensions and weight
Michigan L50B
The Michigan L50B is an integrated tool carrier of about 8.1 t, powered by a 91 hp engine.
01Published dimensions and weight
Dimensions reference
Representative category illustration; exact model may differ.Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight17860 lb8101.2 kg
03Selected published values55
Integrated tool carriers are commonly used for loading and material handling with interchangeable front attachments. Published rows for Michigan L50B include published bucket capacity of 2 yd3 / 1.5 m3, published breakout force of 13623.5 lb / 60.6 kN, published operating weight of 17860 lb / 8101.2 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Length W/ Bucket On Ground” field (20.94 ft / 6380 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (7.03 ft / 2140 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Height To Top Of Cab” field (9.88 ft / 3010 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Length W/ Bucket On Ground20.94 ft6380 mm
Width Over Tires7.03 ft2140 mm
Height To Top Of Cab9.88 ft3010 mm
Wheelbase9.03 ft2750 m
Ground Clearance1.25 ft380 mm
Hinge Pin Max Height12.18 ft3710 mm
Dump Clearance At Max Lift9.09 ft2770 mm
Max Lift Height11.65 ft3550 mm
Fork Tine Length4.02 ft1225 mm
Hook Height At Max Lift - Standard19.3 ft5880 mm
Hook Height At Max Lift - Extended22.35 ft6810 mm
Hook Reach At Max Lift - Standard7.39 ft2250 mm
Hook Reach At Max Lift - Extended9.52 ft2900 mm
Hook Max Reach - Standard10.86 ft3310 mm
Hook Max Reach - Extended5.22 ft1590 mm
Height At Hook Max Reach4.73 ft1440 mm
Length With Out Forks On Ground21.15 ft6445 mm
Reach At Max Height And Dump3.42 ft1040 mm
Engine
Number Of Cylinders44
Engine ModelVME TD 40GAVME TD 40GA
Gross Power96 hp71.6 kw
Net Power91 hp67.9 kw
Power Measured @2200 rpm2200 rpm
Max Torque272.9 lb ft370 Nm
Torque Measured @1400 rpm1400 rpm
Displacement244 cu in4 L
Aspirationturbochargedturbocharged
Operational
Operating Weight17860 lb8101.2 kg
Fuel Capacity45 gal170 L
Cooling System Fluid Capacity5.9 gal22 L
Engine Oil Capacity3 gal11 L
Transmission Fluid Capacity1.9 gal7 L
Front Diff Fluid Capacity6.4 gal24 L
Rear Diff Fluid Capacity6.4 gal24 L
Hydraulic System Fluid Capacity28.1 gal106 L
Turning Radius17.8 ft5400 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage60 amps60 amps
Rear Axle Oscillation12 degrees12 degrees
Static Tipping Load - Bucket10802.7 lb4900 kg
Static Tipping Load - Forks14594.7 lb6620 kg
Tire Size15.5R2515.5R25
Transmission
Transmission TypeVME power shiftVME power shift
Max Speed Forward22.6 mph36.4 km/h
Max Speed Reverse22.6 mph36.4 km/h
Hydraulic System
Pump Typeload sensing axial flow pistonload sensing axial flow piston
Relief Valve Setting3771 psi26000.2 kPa
Pump Flow Capacity8.4 gal/min31.7 L/min
Raise Time4.4 sec4.4 sec
Dump Time1.1 sec1.1 sec
Lower Time3.3 sec3.3 sec
Bucket
Breakout Force13623.5 lb60.6 kN
Bucket Capacity - Heaped2 yd31.5 m3
Bucket Capacity - Struck1.5 yd31.1 m3
Blade
Width7.6 ft2300 mm
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.