- Length W/ Bucket On Ground: 23.92 ft / 7290 mm
- Height To Top Of Cab: 10.67 ft / 3250 mm
- Wheelbase: 9.52 ft / 2900 m
- Ground Clearance: 1.42 ft / 430 mm
Published dimensions and weight
Fiat-Hitachi W130PL
Weighing roughly 12.4 t and rated at 130 hp, the Fiat-Hitachi W130PL is an integrated tool carrier in its size class.
01Published dimensions and weight
Dimensions reference
Representative category illustration; exact model may differ.Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight27359.4 lb12410 kg
03Selected published values54
Integrated tool carriers are commonly used for loading and material handling with interchangeable front attachments. Published rows for Fiat-Hitachi W130PL include published bucket capacity of 2.7 yd3 / 2 m3, published breakout force of 2270570.4 lb / 10100 kN, published operating weight of 27359.4 lb / 12410 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Length W/ Bucket On Ground” field (23.92 ft / 7290 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Height To Top Of Cab” field (10.67 ft / 3250 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (9.52 ft / 2900 m) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Length W/ Bucket On Ground23.92 ft7290 mm
Height To Top Of Cab10.67 ft3250 mm
Wheelbase9.52 ft2900 m
Ground Clearance1.42 ft430 mm
Hinge Pin Max Height12.7 ft3870 mm
Dump Clearance At Max Lift8.49 ft2585 mm
Max Lift Height11.88 ft3620 mm
Fork Tine Length3.94 ft1200 mm
Hook Height At Max Lift - Standard3.25 ft990 mm
Hook Height At Max Lift - Extended5.58 ft1700 mm
Hook Reach At Max Lift - Standard3.48 ft1060 mm
Hook Reach At Max Lift - Extended5.58 ft1700 mm
Length With Out Forks On Ground25.05 ft7635 mm
Reach At Max Height And Dump4.2 ft1280 mm
Engine
Number Of Cylinders66
Engine Make23582358
Engine ModelFiat- 8065TFiat- 8065T
Gross Power140 hp104.4 kw
Net Power130 hp97 kw
Power Measured @2200 rpm2200 rpm
Max Torque411.6 lb ft558 Nm
Torque Measured @1500 rpm1500 rpm
Displacement360.1 cu in5.9 L
Aspirationturbochargedturbocharged
Operational
Operating Weight27359.4 lb12410 kg
Fuel Capacity45 gal170 L
Cooling System Fluid Capacity7.4 gal28 L
Engine Oil Capacity3.2 gal12 L
Transmission Fluid Capacity5.3 gal20 L
Front Diff Fluid Capacity5.6 gal21 L
Rear Diff Fluid Capacity7.7 gal29 L
Hydraulic System Fluid Capacity27.8 gal105 L
Turning Radius2 ft590 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage55 amps55 amps
Rear Axle Oscillation24 degrees24 degrees
Static Tipping Load - Bucket17372.5 lb7880 kg
Static Tipping Load - Forks13933.3 lb6320 kg
Tire Size20.5 - 25 XTLA / 555/70 - 25 XLD20.5 - 25 XTLA / 555/70 - 25 XLD
Transmission
Transmission TypePower-Shift CountershaftPower-Shift Countershaft
Number Of Forward Gears44
Number Of Reverse Gears44
Max Speed Forward24.3 mph39 km/h
Max Speed Reverse24.9 mph40 km/h
Hydraulic System
Pump TypeSealed system with anticavitation and relief valvesSealed system with anticavitation and relief valves
Relief Valve Setting3045 psi20994.6 kPa
Pump Flow Capacity43.6 gal/min165 L/min
Raise Time5.8 sec5.8 sec
Dump Time2.6 sec2.6 sec
Lower Time3.2 sec3.2 sec
Bucket
Breakout Force2270570.4 lb10100 kN
Bucket Capacity - Heaped2.7 yd32 m3
Bucket Capacity - Struck2.7 yd32 m3
Blade
Width8.4 ft2545 mm
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.