- Min Height @ Max Raise Angle: 86 ft / 26.22 m
- Max Height @ Max Raise Angle - No Jib: 136 ft / 41.46 m
- Max Elevating Angle: 80 degrees
- Number Of Sections: 4
Published dimensions and weight
Link-Belt HTT-8675 SERIES II
Rated at 450 hp, the Link-Belt HTT-8675 SERIES II is a hydraulic truck crane.
01Published dimensions and weight
Dimensions reference
Representative category illustration; exact model may differ.Measurement reference — not to scale
01Dimensions referenceLength × width × height
02WeightNot publishedNot published
03Selected published values36
Hydraulic truck cranes are commonly used for mobile lifting where road travel and on-site setup are required. Published rows for Link-Belt HTT-8675 SERIES II include published engine power of 414 hp / 308.8 kw, the published “Min Height @ Max Raise Angle” field of 86 ft / 26.22 m, the published “Max Height @ Max Raise Angle - No Jib” field of 136 ft / 41.46 m. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Min Height @ Max Raise Angle” field (86 ft / 26.22 m) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Max Height @ Max Raise Angle - No Jib” field (136 ft / 41.46 m) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Max Elevating Angle” field (80 degrees) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Boom
Min Height @ Max Raise Angle86 ft26.22 m
Max Height @ Max Raise Angle - No Jib136 ft41.46 m
Max Elevating Angle80 degrees80 degrees
Number Of Sections44
Dimensions
Transport Length48.6 ft14813.28 mm
Transport Width14.8 ft4511.04 mm
Transport Height11.47 ft3496.06 mm
Wheelbase23.1 ft7040.88 mm
Ground Clearance10.89 ft3319.28 mm
Width W/ Outriggers Extended25.99 ft7920 mm
Carrier Length13.55 ft4130 mm
Upper Structure Tail Swing Radius13.9 ft4236.72 mm
Upper Structure Engine
MakeLink-BeltLink-Belt
ModelISX12ISX12
Gross Power414 hp308.8 kw
Net Power450 hp335.6 kw
Power Measured @1800 rpm1800 rpm
Max Torque1550.4 lb ft2102 Nm
Torque Measured @1200 rpm1200 rpm
Displacement726.2 cu in11.9 L
Carrier Engine
MakeLink-BeltLink-Belt
ModelQSX15QSX15
Gross Power450 hp335.6 kw
Net Power480 hp358 kw
Power Measured @1800 rpm1800 rpm
Max Torque1550.4 lb ft2102 Nm
Torque Measured @1400 rpm1400 rpm
Displacement915.4 cu in15 L
Operational
Def Tank Capacity10 gal37.8 L
Fuel Capacity80 gal302.8 L
Upper Structure Hydraulic System Fluid Capacity144.1 gal545.1 L
TiresFront 445/65R22.5 / Rear 445/65R22.5Front 445/65R22.5 / Rear 445/65R22.5
Ground Pressure40 psi275.8 kPa
Operating Voltage12 V12 V
Transmission
Number Of Forward Gears1212
Number Of Reverse Gears22
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.