- Max Cutting Height: 28.3 ft / 8625.84 mm
- Max Reach Along Ground: 26.11 ft / 7958.33 mm
- Max Vertical Wall Digging Depth: 16.61 ft / 5059.68 mm
- Max Digging Depth: 18.3 ft / 5577.84 mm
Published dimensions and weight
Hitachi ZX130-6
The Hitachi ZX130-6 is a hydraulic excavator; its 4JJ1 engine is rated at 101 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02WeightNot publishedNot published
03Selected published values58
Hydraulic excavators are commonly used for digging, trenching, loading and site preparation. Published rows for Hitachi ZX130-6 include a published maximum digging depth of 18.3 ft / 5577.84 mm, published bucket digging force of 20525 lb / 91.3 kN, published arm digging force of 14991 lb / 66.69 kN. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Max Cutting Height” field (28.3 ft / 8625.84 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Max Reach Along Ground” field (26.11 ft / 7958.33 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Max Vertical Wall Digging Depth” field (16.61 ft / 5059.68 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Boom/Stick Option (Hex) 1
Max Cutting Height28.3 ft8625.84 mm
Max Reach Along Ground26.11 ft7958.33 mm
Max Vertical Wall Digging Depth16.61 ft5059.68 mm
Max Digging Depth18.3 ft5577.84 mm
Arm Digging Force - Iso15476 lb68.85 kN
Arm Digging Force - Sae14991 lb66.69 kN
Bucket Digging Force - Iso23435 lb104.25 kN
Bucket Digging Force - Sae20525 lb91.3 kN
Max.Dumping Height20.4 ft6217.92 mm
Dimensions
Ground Clearance1.35 ft410 mm
Tail Swing Radius7.2 ft2194.56 mm
Track Gauge6.6 ft2011.68 mm
Counterweight Clearance2.76 ft840 mm
Overall Length25.4 ft7741.92 mm
Overall Width10.6 in269 mm
Overall Height9 ft2743.2 mm
Center To Center – Idler To Sprocket9.5 ft2895.6 mm
Cab Height10.99 in279 mm
Undercarriage Overall Length11.9 ft3627.12 mm
Undercarriage
Drawbar Pull24729 lb110.01 kN
Track AdjustmentHydraulicHydraulic
Number Of Track Rollers Per Side77
Number Of Carrier Rollers Per Side11
Engine
Emission Tier LevelEPA Final Tier 4EPA Final Tier 4
Battery22
Number Of Cylinders44
Off-Level Capacity70 %70 %
Engine Model4JJ14JJ1
Net Power101 hp75.4 kw
Power Measured @2000 rpm2000 rpm
AspirationTurbocharged and charged air cooledTurbocharged and charged air cooled
Displacement183.1 cu in3 L
Alternator50 amps50 amps
Operational
Propel Gearbox (Each)1.1 gal4 L
Swing Gearbox0.9 gal3.2 L
Fuel Capacity75.3 gal285 L
Cooling System Fluid Capacity5.6 gal21 L
Engine Oil Capacity4.5 gal17 L
Hydraulic System Relief Valve Pressure26.9 psi185 kPa
Hydraulic Pump Flow Capacity18.3 gal/min69 L/min
Performance
Travel Speed Low2.1 mph3.3 km/h
Travel Speed - High3.5 mph5.5 km/h
Swing Mechanism
Swing Speed13.3 rpm13.3 rpm
Swing Torque25077.2 lb ft34000 Nm
Blade
Transport Height9.5 ft2895.6 mm
Blade Lift Height20.6 in523 mm
Blade Cut Below Grade19.3 in488 mm
Blade Lift Angle27 degrees27 degrees
Blade Length8.3 ft2.6 m
Blade Width8.5 ft2590 mm
Blade Height20.6 in523 mm
Hydraulic System
Pilot Pump - Maximum Flow27.8 gal/min105 L/min
Max. Pressure Setting570 psi3930.1 kPa
Implement - Operating Pressure4980 psi34335.9 kPa
Travel - Operating Pressure4980 psi34335.9 kPa
Swing - Operating Pressure4685 psi32302 kPa
Power Boost - Operating Pressure5265 psi36300.9 kPa
ControlsPilot levers, short-stroke, low-effort hydraulic pilot controls with shutoff leverPilot levers, short-stroke, low-effort hydraulic pilot controls with shutoff lever
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.