- Length W/ Blade: 18.64 ft / 5680 mm
- Width Over Tracks: 8.17 ft / 2489 mm
- Height To Top Of Cab: 10.85 ft / 3305 mm
- Length Of Track On Ground: 9.72 ft / 2960 mm
Published dimensions and weight
John Deere 950C
The John Deere 950C pairs the D926 TI engine (230 hp) with an operating weight near 23 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight50600 lb22950 kg
03Selected published values44
Crawler tractors are commonly used for pushing, grading and clearing material where tracked traction is useful. Published rows for John Deere 950C include published operating weight of 50600 lb / 22950 kg, published engine power of 230 hp / 171.6 kw, published hydraulic flow of 77 gal/min / 292 L/min. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Length W/ Blade” field (18.64 ft / 5680 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tracks” field (8.17 ft / 2489 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Height To Top Of Cab” field (10.85 ft / 3305 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Length W/ Blade18.64 ft5680 mm
Width Over Tracks8.17 ft2489 mm
Height To Top Of Cab10.85 ft3305 mm
Length Of Track On Ground9.72 ft2960 mm
Ground Clearance1.59 ft482 mm
Length W/O Blade14.11 ft4300 mm
Undercarriage
Track Gauge6.5 ft1980 mm
Standard Shoe Size20 in508 mm
Number Of Shoes Per Side3939
Ground Pressure10.81 psi74.54 kPa
Ground Contact Area4680 in23.02 m2
Number Of Track Rollers Per Side77
Track Pitch8.5 in215.9 mm
Engine
Number Of Cylinders66
Engine Make22452245
Engine ModelD926 TID926 TI
Net Power230 hp171.6 kw
Power Measured @1800 rpm1800 rpm
Max Torque797 lb ft1080.6 Nm
Displacement610 cu in10 L
Torque Measured @1300 rpm1300 rpm
AspirationIntercooled and turbochargedIntercooled and turbocharged
Operational
Operating Weight50600 lb22950 kg
Fuel Capacity119 gal450 L
Cooling System Fluid Capacity17.6 gal64.4 L
Engine Oil Capacity6.7 gal25.5 L
Hydraulic Fluid Capacity47 gal178 L
Powertrain Fluid Capacity47 gal178 L
Final Drives Fluid Capacity3.8 gal14.5 L
Operating Voltage24 V24 V
Alternator Supplied Amperage55 amps55 amps
Transmission
Transmission TypeDual-path, electronic-controlled, closed-loop hydrostatic driveDual-path, electronic-controlled, closed-loop hydrostatic drive
Number Of Forward Gears33
Number Of Reverse Gears33
Max Speed - Forward6.8 mph11 km/h
Max Speed - Reverse6.8 mph11 km/h
Hydraulic System
Pump TypeVariable-displacement piston pump with load-sensing proportional pump flow controlVariable-displacement piston pump with load-sensing proportional pump flow control
Relief Valve Pressure2320 psi16000 kPa
Pump Flow Capacity77 gal/min292 L/min
Standard Blade
Width13.1 ft3965 mm
Height57 in1450 mm
Capacity9.5 yd37.2 m3
Blade Angle (Both Directions)25 degrees25 degrees
Cutting Depth21 in525 mm
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.