- Width Over Tracks: 6 ft / 1828 mm
- Height To Top Of Cab: 8.66 ft / 2639 mm
- Length Of Track On Ground: 84 ft / 25603.2 mm
- Ground Clearance: 1.21 ft / 366 mm
Published dimensions and weight
Case 650L
Weighing roughly 8 t and rated at 74 hp, the Case 650L is a crawler tractor in its size class.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight17546.6 lb7959 kg
03Selected published values50
Crawler tractors are commonly used for pushing, grading and clearing material where tracked traction is useful. Published rows for Case 650L include published operating weight of 17546.6 lb / 7959 kg, published engine power of 80.5 hp / 60.1 kw, published hydraulic flow of 20.9 gal/min / 78.8 L/min. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Width Over Tracks” field (6 ft / 1828 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Height To Top Of Cab” field (8.66 ft / 2639 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Length Of Track On Ground” field (84 ft / 25603.2 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Width Over Tracks6 ft1828 mm
Height To Top Of Cab8.66 ft2639 mm
Length Of Track On Ground84 ft25603.2 mm
Ground Clearance1.21 ft366 mm
Height To Top Of Rops103.9 in2639 mm
Blade Lift Above Ground33.59 in853 mm
Cast Reach11.19 in284 mm
Blade Depth Below Ground20.91 in531 mm
Undercarriage
Number Of Upper Rollers11
Width Of Shoes27.01 in686 mm
Number Of Bottom Rollers Per Side66
Electrical System
Alternator90 amp90 amp
Battery12-volt low-maintenance12-volt low-maintenance
Engine
Fuel2 Diesel2 Diesel
Emission Tier LevelTier3Tier3
Fan20 in,(500 mm)Diameter20 in,(500 mm)Diameter
Pump Operating Angles -Side-To-Side45 degrees45 degrees
Pump Operating Angles - Fore And Aft45 degrees45 degrees
Transmission TypeHydrostaticHydrostatic
Fuel Tank41 gal155 L
Engine ModelCase 445TA/EG7aCase 445TA/EG7a
Gross Power80.5 hp60.1 kw
Net Power74 hp55.2 kw
Power Measured @2000 rpm2000 rpm
Displacement274.7 cu in4.5 L
Drive Train
Max Drawbar Pull36081.9 lb160.5 kN
Parking BrakesHeavy-duty, spring-applied,Heavy-duty, spring-applied,
Final Drive2 helical gear2 helical gear
Capacities
Engine Oil With Filter3.3 gal12.3 L
Operational
Long Track16248.1 lb7370 kg
Wide Track16797.1 lb7619 kg
Low Ground Pressure17546.6 lb7959 kg
Winch1000.9 lb454 kg
Center Rock Guard339.6 lb154 kg
Sweeps110.3 lb50 kg
Operating Weight17546.6 lb7959 kg
Performance
Pump Flow20.3 gal/min76.9 L/min
Transmission
Max Speed - Forward5.5 mph8.9 km/h
Max Speed - Reverse5.5 mph8.9 km/h
Hydraulic
Lift Cylinder(S)22
Lift Cylinder-Bore Diameter3.6 in89 mm
Lift Cylinder - Rod Diameter1.8 in44.5 mm
Lift Cylinder - Stroke15.6 in394 mm
Blade
Blade Width10 ft3048 mm
Blade Capacity2.2 yd31.7 m3
Blade Height33.2 in841 mm
Blade TypePATPAT
Hydraulic System
Pump TypeVariable Displacement PistonVariable Displacement Piston
Pump Flow Capacity20.9 gal/min78.8 L/min
Standard Blade
Blade Angle (Both Directions)25 degrees25 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.