- Length With Blade On Ground: 25.76 ft / 7851.65 mm
- Ground Clearance: 1.5 ft / 457.2 mm
- Width Over Wheels: 10.95 ft / 3337.56 mm
- Height To Top Of Cab: 12.75 ft / 3886.2 mm
Published dimensions and weight
Caterpillar 816F Series 2
The Caterpillar 816F Series 2 is a compactor of about 23.8 t, built around the C9 Acert engine.
01Published dimensions and weight
Dimensions reference
Representative category illustration; exact model may differ.Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight52364 lb23752 kg
03Selected published values73
Compactors are commonly used to increase the density of soil, aggregate, waste or paving material. Published rows for Caterpillar 816F Series 2 include published drum width of 3.33 ft / 1.02 m, published operating weight of 52364 lb / 23752 kg, published engine power of 253 hp / 188.7 kw. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Length With Blade On Ground” field (25.76 ft / 7851.65 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Ground Clearance” field (1.5 ft / 457.2 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Wheels” field (10.95 ft / 3337.56 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Length With Blade On Ground25.76 ft7851.65 mm
Ground Clearance1.5 ft457.2 mm
Width Over Wheels10.95 ft3337.56 mm
Height To Top Of Cab12.75 ft3886.2 mm
Wheelbase10.9 ft3322.32 mm
Dimensions (Approximate)
Ground Clearance1.49 ft0.46 m
Height - Top Of Cab With A/C12.75 ft3.89 m
Blade Width - Straight11.67 ft3.56 m
Height - Top Of Hood8.16 ft2.49 m
Length - With Blade On Ground25.76 ft7.86 m
Turning Radius - Outside End Bits21.21 ft6.47 m
Wheel Base10.9 ft3.33 m
Width - Over End Bits - Blade11.99 ft3.66 m
Width - Over Wheels10.95 ft3.34 m
Height - Top Of Exhaust Pipe11.36 ft3.47 m
Centerline Of Rear Axle To Edge Of Bumper6.22 ft1.9 m
Centerline Of Rear Axle To Hitch5.5 ft1.68 m
Drum Width3.33 ft1.02 m
Ground Clearance - Bumper2.64 ft0.81 m
Ground Clearance - Striker Bars2.13 ft0.65 m
Operating Specifications
Ground Clearance1.5 ft0.46 m
Engine
Engine Make22362236
Engine ModelC9 AcertC9 Acert
Gross Power253 hp188.7 kw
Net Power232 hp173.1 kw
Displacement537 cu in8.8 L
Torque Rise19 %19 %
Bore4.4 in111.8 mm
Stroke5.9 in149.9 mm
Net Power - Iso 9249235 hp175.3 kw
Eec 80/1269235 hp175.3 kw
Sae J1349232 hp173.1 kw
Net Power Iso 3046-2232 hp173.1 kw
Operational
Operating Weight52364 lb23752 kg
Fuel Capacity117.8 gal446 L
Hydraulic System Fluid Capacity36.2 gal137.1 L
Cooling System Fluid Capacity14.5 gal54.9 L
Transmission Fluid Capacity13.2 gal50 L
Transmission
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Reverse4 mph6.5 km/h
Max Speed - Forward3.5 mph5.7 km/h
Forward - 13.5 mph5.7 km/h
Forward - 25.9 mph9.5 km/h
Reverse - 14 mph6.5 km/h
Reverse - 26.6 mph10.7 km/h
Weights
Operating Weight52364 lb23752 kg
Hydraulic System
Relief Valve Setting2248 psi2248 psi
Lift Cylinder Bore X Stroke120.65 mm x 913.9 mm 4.75 in x 36 in120.65 mm x 913.9 mm 4.75 in x 36 in
Vane Pump Output At 2015 Rpm And 6900 Kpa (1000 Psi)29.6 gal/min29.6 gal/min
Blade
Height6.3 in159.3 mm
Axles
FrontFixedFixed
Oscillating Rear8 degrees8 degrees
Brakes
StandardsMeet OSHA regulationsMeet OSHA regulations
Service Refill Capacities
Cooling System14.5 gal54.9 L
Fuel Tank117.8 gal446 L
Crankcase9 gal34.1 L
Hydraulic Tank23.2 gal87.9 L
Hydraulic System - Including Tank36.2 gal137.1 L
Transmission13.2 gal50 L
Differential - Final Drives - Front11.4 gal43.2 L
Differential - Final Drives - Rear11.4 gal43.2 L
Cab
Rops/FopsMeet SAE and ISO standardsMeet SAE and ISO standards
Sound Performance
StandardsMeet required sound standardsMeet required sound standards
Straight Blade
Height6.3 ft2 m
Width - Over End Bits11.9 ft3.7 m
Moldboard - Length11.7 ft3.6 m
Wheels - Chevron-Pattern, Chopper Blades
Drum Width3.4 ft1.1 m
Drum Diameter4.3 ft1.3 m
Blades Per Wheel2020
Wheels - Plus Tip Teeth With Abrasion Resistant Material (Arm)
Drum Width3.4 ft1.1 m
Drum Diameter4.3 ft1.3 m
Tips Per Wheel2020
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.