- Overall Length: 30.25 ft / 9213 mm
- Overall Width: 10.75 ft / 3283 mm
- Overall Height: 11.25 ft / 3423 mm
- Wheelbase: 13.5 ft / 4119 mm
Published dimensions and weight
John Deere 300C
The John Deere 300C is an articulated dump truck powered by a 251 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Total Empty42593 lb19319.9 kg
03Selected published values42
Articulated dump trucks are commonly used to haul bulk material across construction, quarry and earthmoving sites. Published rows for John Deere 300C include published payload of 59524 lb / 26999.64 kg, published body capacity of 22 yd3 / 16.83 m3, published engine power of 261 hp / 194.7 kw. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (30.25 ft / 9213 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Overall Width” field (10.75 ft / 3283 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Overall Height” field (11.25 ft / 3423 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length30.25 ft9213 mm
Overall Width10.75 ft3283 mm
Overall Height11.25 ft3423 mm
Wheelbase13.5 ft4119 mm
Ground Clearance1.68 ft511 mm
Dump Height19.93 ft6079 mm
Dump Ground Clearance2.1 ft640 mm
Dump
Dump Angle65 degrees65 degrees
Lower Time7 sec7 sec
Rated Payload59524 lb26999.64 kg
Capacity - Struck17 yd313 m3
Raise Time14 sec14 sec
Capacity - Heaped22 yd316.83 m3
Engine
Engine Make23462346
Engine ModelOM442OM442
Gross Power261 hp194.7 kw
Net Power251 hp187.2 kw
Power Measured @2100 rpm2100 rpm
Max Torque723 lb ft980.3 Nm
Torque Measured @1300 rpm1300 rpm
AspirationNaturally aspiratedNaturally aspirated
Displacement920 cu in15.1 L
Operational
Fuel Capacity71 gal268.8 L
Hydraulic System Fluid Capacity21 gal79.5 L
Cooling System Fluid Capacity10 gal37.9 L
Engine Oil Capacity8 gal30.3 L
Transmission Fluid Capacity4.2 gal15.9 L
Operating Voltage24 V24 V
Alternator Supplied Amperage55 amps55 amps
Tire Size23.5R2523.5R25
Transmission
Transmission TypeZF 6WG 210 countershaft design with integral drop box, constantly meshing gears, hydraulically actuated multiple-disc clutch, electronic control, hydrodynamic torque converter with lock-up, built-in PTO driveZF 6WG 210 countershaft design with integral drop box, constantly meshing gears, hydraulically actuated multiple-disc clutch, electronic control, hydrodynamic torque converter with lock-up, built-in PTO drive
Number Of Forward Gears66
Number Of Reverse Gears33
Max Speed29 mph46.7 km/h
Weights
Center Axle - Empty11442 %11442 %
Front Axle - Empty20150 lb9139.9 kg
Rear Axle - Empty11001 lb4990 kg
Front Axle - Loaded32165 %32165 %
Center Axle - Loaded35197 %35197 %
Rear Axle - Loaded34756 lb15765.1 kg
Total Empty42593 lb19319.9 kg
Total Loaded102118 lb46320 kg
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.