Published dimensions and weight

John Deere 9470RX Scraper Special

Rated at 470 hp, the John Deere 9470RX Scraper Special is a 4WD tractor.

01Published dimensions and weight

Dimensions reference

Measurement reference — not to scale

01Dimensions referenceLength × width × height

02WeightNot publishedNot published

03Selected published values40

Published highlights

Engine Manufacturer: John Deere PowerTech™ PSS 13.5L
Compression Ratio: 16:0:1
Rated Power: 470 hp / 350.5 kw
Displacement: 824 cu in / 13.6 L

Typical use

Four-wheel-drive tractors are commonly used for high-draft field work and towing agricultural implements. Published rows for John Deere 9470RX Scraper Special include the published “Engine Manufacturer” field of John Deere PowerTech™ PSS 13.5L, the published “Compression Ratio” field of 16:0:1, the published “Rated Power” field of 470 hp / 350.5 kw. These values describe the published configuration; verify the specific machine's configuration, attachments and records.

Buyer review notes

Compare the published “Engine Manufacturer” field (John Deere PowerTech™ PSS 13.5L) with the specific machine's configuration and records; options and condition can differ.
Compare the published “Compression Ratio” field (16:0:1) with the specific machine's configuration and records; options and condition can differ.
Compare the published “Rated Power” field (470 hp / 350.5 kw) with the specific machine's configuration and records; options and condition can differ.

02Specifications

Published values, clearly grouped.

Published specifications and measurements are organized by section for quick reference.

Engine

Engine ManufacturerJohn Deere PowerTech™ PSS 13.5LJohn Deere PowerTech™ PSS 13.5L

Compression Ratio16:0:116:0:1

Rated Power470 hp350.5 kw

Displacement824 cu in13.6 L

Torque Rise38 %38 %

Max Power517 hp385.6 kw

AspirationDual series turbocharger w/fixed geometry first stage-variable geometry second stage - air-toair aftercooling and cooled exhaust gas recirculationDual series turbocharger w/fixed geometry first stage-variable geometry second stage - air-toair aftercooling and cooled exhaust gas recirculation

Rated Pto Power335 hp249.9 kw

Power Boost (Available In Transport And/Or Mobile Pto Applications)10 percent10 percent

Bore And Stroke5.2 in. (132 mm) x 6.5 in. (165 mm5.2 in. (132 mm) x 6.5 in. (165 mm

Capacities

Fuel Tank - Diesel400 gal1514.2 L

Crankcase Oil Volume12.7 gal48.1 L

Def Tank22 gal83.3 L

Cooling System14.9 gal56.5 L

Hydraulic/Transmission/Axle Oil Without 3-Point Rear Hitch And Pto58 gal219.6 L

Hydraulic/Transmission/Axle Oil With 3-Point Rear Hitch And Pto60 gal227.2 L

Electrical

Alternator (12-V)200 amps / 12 Volt – 240 amps / 12 Volt optional200 amps / 12 Volt – 240 amps / 12 Volt optional

Battery925 CCA-3925 CCA-3

Fuel System

DescriptionElectronically controlled, electronic unit injectors (self priming)Electronically controlled, electronic unit injectors (self priming)

Filter Primary10 micron replaceable cartridge w/water indication sensor and drain10 micron replaceable cartridge w/water indication sensor and drain

Filter Secondary2 micron spin-on element2 micron spin-on element

Filter SystemTwo Stage with water separator and service indicator lightTwo Stage with water separator and service indicator light

Steering

Hydraulic Power-SteeringStandardStandard

Active Command Steering (Acs)AvailableAvailable

Transmission

Descriptione18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™

Hydraulic

Maximum Operating Pressure2900 psi19994.8 kPa

Scv Control4 - 6 factory, up to 8 field installed4 - 6 factory, up to 8 field installed

Maximum Pump Flow With Base Hydraulics58 gal/min219.6 L/min

Maximum Pump Flow: High-Flow115 gal/min435.4 L/min

Available Flow At A Single Scv - 1 /2 In Coupler35 gal/min132.5 L/min

Available Flow At A Single Scv With High-Flow - 3 /4 In Coupler42 gal/min159 L/min

DescriptionClosed-center, pressure/flow compensatedClosed-center, pressure/flow compensated

Axles

DescriptionBull gear and double idler with floating pinion.Bull gear and double idler with floating pinion.

120 Mm FlangedStandardStandard

Rear Axle SupportsAvailable (with 30 or 36 in. tracks)Available (with 30 or 36 in. tracks)

Front Axle SupportsAvailable (with sprayer tanks or dozer blade)Available (with sprayer tanks or dozer blade)

Wheelbase Option (Cct) 1

Wheelbase Length4154 in105511.6 mm

Turning Radius21.0 ft (6400 mm) on Ag models / 30.0 ft (9144 mm) on Scraper Special models21.0 ft (6400 mm) on Ag models / 30.0 ft (9144 mm) on Scraper Special models

3-Point Hitch

DescriptionElectric-Hydraulic 3-Point Hitch with Draft SensingElectric-Hydraulic 3-Point Hitch with Draft Sensing

Category 4n/3 With Quik-CouplerAvailable: 15000 lb (6804 kg) , Available: 20000 lb (9072 kg) , Available: 15000 lb (6804 kg), Available: 20000 lb (9072 kg)Available: 15000 lb (6804 kg) , Available: 20000 lb (9072 kg) , Available: 15000 lb (6804 kg), Available: 20000 lb (9072 kg)

Need the machine, not just the numbers?

Find one, value one, or tell the market what you need.

View John Deere 9470RX Scraper Special listings Get a valuation for your John Deere 9470RX Scraper Special Post a want-to-buy request

Manufacturer-published specifications.

John Deere 9470RX Scraper Special

Published values, clearly grouped.

Find one, value one, or tell the market what you need.

Other John Deere models