- Su - Blade Width : 12.9 ft / 3.94 m
- Blade Type : SU, U
- Lgp Su-Blade Capacity With Trash Rack : 27.6 yd3 / 21.11 m3
- U-Blade Capacity With Trash Rack : 32.4 yd3 / 24.78 m3
Dimensions et poids publiés
Caterpillar D8T WH
D'une masse d'environ 38,7 t et développant 310 ch, le Caterpillar D8T WH est un tracteur sur chenilles de sa catégorie.
01Dimensions et poids publiés
Référence des dimensions
Repère de mesure — non à l'échelle
01Référence des dimensionsLongueur × largeur × hauteur
02Poids en ordre de marche85150 lb38660 kg
03Valeurs publiées sélectionnées120
Les tracteurs sur chenilles servent couramment à pousser, à niveler et à dégager des matériaux lorsque la traction sur chenilles est utile. Les lignes publiées pour Caterpillar D8T WH comprennent un poids opérationnel publié de 85150 lb / 38660 kg, une puissance moteur publiée de 347 hp / 258.8 kw, le champ publié « Su - Blade Width » de 12.9 ft / 3.94 m. Ces valeurs décrivent la configuration publiée; vérifiez la configuration, les accessoires et les documents de la machine précise.
- Comparez le champ publié « Su - Blade Width » (12.9 ft / 3.94 m) à la configuration et aux documents de la machine précise; les options et l'état peuvent différer.
- Comparez le champ publié « Blade Type » (SU, U) à la configuration et aux documents de la machine précise; les options et l'état peuvent différer.
- Comparez le champ publié « Lgp Su-Blade Capacity With Trash Rack » (27.6 yd3 / 21.11 m3) à la configuration et aux documents de la machine précise; les options et l'état peuvent différer.
02Spécifications
Valeurs publiées, regroupées clairement.
Les spécifications et mesures publiées sont organisées par section pour faciliter la consultation.
Lames
Su - Blade Width12.9 ft3.94 m
Blade TypeSU, USU, U
Lgp Su-Blade Capacity With Trash Rack27.6 yd321.11 m3
U-Blade Capacity With Trash Rack32.4 yd324.78 m3
Su-Blade Capacity - With Trash Rack26.1 yd319.96 m3
U-Blade Width14 ft4.27 m
Dimensions
Longueur avec lame19.99 ft6090 mm
Largeur hors chenilles8.66 ft2640 mm
Hauteur au sommet de la cabine11.35 ft3460 mm
Longueur de chenille au sol10.53 ft3210 mm
Garde au sol2.03 ft617.22 mm
Longueur sans lame15.22 ft4640 mm
Overall Length - Basic Tractor15.22 ft4.64 m
Width - Over Trunnions10 ft3.05 m
Width - Without Blade120 in3048 mm
Width - With Blade155 in3937 mm
Overall Length - With Blade240 in6096 mm
Width - Without Trunnions - Standard Shoe8.66 ft2.64 m
Height - Rops/Canopy11.35 ft3.46 m
Height - Stripped Top8.76 ft2.68 m
Dimensions - Lgp
Voie des chenilles92 in2336.81 mm
Machine Height - Grouser Tip - Exhaust Stack129.7 in3294.38 mm
Length - Basic Tractor - With Striker Bars With Two Counterweights*206.4 in5242.57 mm
Width - Tractor - Over Trunnions130.4 in3312.16 mm
Height - Top Of Roof-Mounted Precleaner145.2 in3688.08 mm
Note*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
Height - Grouser3.1 in78.74 mm
Machine Height - Grouser Tip - Length Of Track On Ground126.2 in3205.48 mm
Without Trunnions - Standard Shoe Width130 in3302 mm
Machine Height - Grouser Tip - Erops (Top Of Railing)140.4 in3566.16 mm
Length - Basic Tractor - Tag Link Trunnion To Tip - Rear Grouser*183 in4648.2 mm
Machine Height - Grouser Tip - Ground Clearance24.1 in612.14 mm
Dimensions - Non-Suspended
Voie des chenilles82 in2082.81 mm
Width - Tractor - Over Trunnions120.4 in3058.16 mm
Note*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
Height - Grouser3.1 in78.74 mm
Height - Top Of Roof-Mounted Precleaner145.2 in3688.08 mm
Length - Basic Tractor - Tag Link Trunnion To Tip - Rear Grouser*183 in4648.2 mm
Length - Basic Tractor - With Striker Bars With Two Counterweights*206.4 in5242.57 mm
Machine Height - Grouser Tip - Erops (Top Of Railing)140.7 in3573.78 mm
Machine Height - Grouser Tip - Exhaust Stack136.31 in3462.02 mm
Machine Height - Grouser Tip - Ground Clearance23.8 in604.52 mm
Machine Height - Grouser Tip - Length Of Track On Ground128.31 in3258.82 mm
Without Trunnions - Standard Shoe Width106 in2692.4 mm
Dimensions - Standard
Voie des chenilles82 in2082.81 mm
Length - Basic Tractor - With Striker Bars With Two Counterweights*206.4 in5242.57 mm
Length - Basic Tractor - Tag Link Trunnion To Tip - Rear Grouser*183 in4648.2 mm
Height - Top Of Roof-Mounted Precleaner145.2 in3688.08 mm
Height - Grouser3.1 in78.74 mm
Machine Height - Grouser Tip - Ground Clearance24.1 in612.14 mm
Without Trunnions - Standard Shoe Width106 in2692.4 mm
Note*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
Machine Height - Grouser Tip - Length Of Track On Ground126.2 in3205.48 mm
Machine Height - Grouser Tip - Erops (Top Of Railing)140.4 in3566.16 mm
Width - Tractor - Over Trunnions120.4 in3058.16 mm
Machine Height - Grouser Tip - Exhaust Stack136.7 in3472.18 mm
Train de roulement
Voie des chenilles6.84 ft2082.81 mm
Dimension standard des patins22 in560 mm
Length - Track On Ground10.53 ft3.21 m
Track Gauge - Lgp92 in2336.81 mm
Track On Ground - Lgp126 in3200.4 mm
Track Rollers/Side88
Track Rollers/Side - Lgp88
Largeur de chenille1.84 ft0.57 m
Nombre de galets de chenille par côté88
Width - Shoe - Lgp38 in965.2 mm
Ground Contact Area - Lgp9610 in26.2 m2
Surface de contact au sol5549 in23.58 m2
Moteur
Nombre de cylindres66
Marque du moteur22362236
Modèle du moteurC15 ACERTC15 ACERT
Puissance brute347 hp258.8 kw
Puissance nette310 hp231 kw
Puissance mesurée à2000 rpm2000 rpm
Cylindrée928 cu in15.3 L
Alésage5.4 in137.2 mm
Course6.8 in171.5 mm
EmissionsTier 4 Final/Stage IV/Korea Tier 4Tier 4 Final/Stage IV/Korea Tier 4
Flywheel Power335 hp249.9 kw
Note (1)All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note (2)Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Note (3)The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.
Rpm1850 rpm1850 rpm
Net Power - 1,900 Rpm - Iso 9249/Sae J1349312 hp232.7 kw
Net Power - 1,900 Rpm - Iso 9249/Sae J1349 (Din)317 hp236.4 kw
Net Power - Maximum - Iso 9249/Sae J1349 At 1,700 Rpm335 hp249.9 kw
Net Power - Maximum - Iso 9249/Sae J1349 Din At 1,700 Rpm343 hp255.8 kw
Exploitation
Poids en ordre de marche85150 lb38660 kg
Capacité de carburant170 gal643 L
Tension de fonctionnement24 V24 V
Ampérage fourni par l'alternateur100 amps100 amps
Transmission
1 Forward2.1 mph3.4 km/h
2 Forward3.8 mph6.2 km/h
3 Forward6.6 mph10.7 km/h
1 Reverse2.8 mph4.6 km/h
2 Reverse5 mph8.1 km/h
3 Reverse8.8 mph14.2 km/h
1.0 Forward2.1 mph3.4 km/h
2.0 Forward3.8 mph6.2 km/h
3.0 Forward6.6 mph10.7 km/h
1.0 Reverse2.8 mph4.6 km/h
2.0 Reverse5 mph8.1 km/h
3.0 Reverse8.8 mph14.2 km/h
Poids
Poids en ordre de marche86710 lb39331 kg
Lame standard
Largeur12.9 ft3940 mm
Capacité26.1 yd319.9 m3
Capacités de remplissage d'entretien
Réservoir de carburant170 gal643.6 L
Équipement de série
RopsSAE J1040 MAY94, ISO 3471:1994SAE J1040 MAY94, ISO 3471:1994
FopsSAE J/ISO 3349 APR98 Level II, ISO 3449:1992 Level IISAE J/ISO 3349 APR98 Level II, ISO 3449:1992 Level II
Rippers
Each Additional Shank732 lb332.1 kg
Poids en ordre de marche
Lgp Waste Handler91600 lb41549.1 kg
Standard Waste Handler86710 lb39331 kg
Blades - Capacity (Sae J1265)
8 U Landfill27.7 yd321.2 m3
8 Su Landfill25.6 yd319.6 m3
8 Su Lgp Landfill28.9 yd322.1 m3
Blades - Width - Over End Bits
8 Su Landfill12.9 ft4 m
8 U Landfill13.9 ft4.3 m
8 Su Lgp Landfill14.9 ft4.6 m
Shipping Weight
Lgp Waste Handler77900 lb35334.9 kg
Standard Waste Handler73400 lb33293.7 kg
Besoin de la machine, pas seulement des chiffres?
Trouvez-en une, évaluez-la ou publiez votre demande.
Spécifications publiées par le fabricant.