- Largeur hors tout : 4.65 ft / 1.42 m
- Number Of Tines : 36 double tines
- Tine To Tine Width : 3.69 ft / 1.13 m
- Number Of Bars : 4
Dimensions et poids publiés
Hesston 745
La Hesston 745 associe le moteur Cat C18 ACERT (496 ch) à une masse d'environ 1,7 t.
01Dimensions et poids publiés
Référence des dimensions
Illustration représentative de la catégorie; le modèle exact peut différer.Repère de mesure — non à l'échelle
01Référence des dimensionsLongueur × largeur × hauteur
02Poids3719.2 lb1687 kg
03Valeurs publiées sélectionnées99
Les presses à balles servent couramment à ramasser et à former les récoltes coupées en balles pour leur manutention et leur entreposage. Les lignes publiées pour Hesston 745 comprennent une largeur de balle publiée de 3.9 ft / 1182 mm, un diamètre de balle publié de 5.2 ft / 1575 mm, une puissance de prise de force publiée de 40 hp / 29.83 kw. Ces valeurs décrivent la configuration publiée; vérifiez la configuration, les accessoires et les documents de la machine précise.
- Comparez le champ publié « Largeur hors tout » (4.65 ft / 1.42 m) à la configuration et aux documents de la machine précise; les options et l'état peuvent différer.
- Comparez le champ publié « Number Of Tines » (36 double tines) à la configuration et aux documents de la machine précise; les options et l'état peuvent différer.
- Comparez le champ publié « Tine To Tine Width » (3.69 ft / 1.13 m) à la configuration et aux documents de la machine précise; les options et l'état peuvent différer.
02Spécifications
Valeurs publiées, regroupées clairement.
Les spécifications et mesures publiées sont organisées par section pour faciliter la consultation.
Ramasseur de la presse
Largeur hors tout4.65 ft1.42 m
Number Of Tines36 double tines36 double tines
Tine To Tine Width3.69 ft1.13 m
Number Of Bars44
Dimensions
Longueur hors tout12.26 ft3734 mm
Largeur hors tout7.71 ft2350 mm
Hauteur hors tout8.42 ft2565 mm
Tractor Pto Power Required40 hp29.83 kw
Poids3719.2 lb1687 kg
Dimension des balles
Largeur de la balle3.9 ft1182 mm
Bale Diameter - Min2.5 ft762 mm
Bale Diameter - Max5.2 ft1575 mm
Bale Weight - Max1250 lb567 kg
Moteur
Cylindrée1106 cu in18.2 L
Alésage5.7 in144.8 mm
Course7.2 in182.9 mm
EmissionsThe 745 meets Tier 4 Final/Stage IV emission standards.The 745 meets Tier 4 Final/Stage IV emission standards.
Net Power - Sae J1349496 hp369.9 kw
Gross Power - Sae J1995511 hp381.1 kw
Modèle du moteurCat C18 ACERTCat C18 ACERT
Net Power - Iso 14396504 hp375.9 kw
Note (1)The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Note (2)The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (3)Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.
Note (4)DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
No Engine De-Rating Required Below10000 ft3048 m
Peak Engine Torque Gross (Sae J1995)1931 lb ft2618.1 Nm
Peak Engine Torque Speed1200 rpm1200 rpm
Peak Engine Torque Net (Sae J1349)1887 lb ft2558.5 Nm
Engine Model - U.S. Epa Tier 4 Final, Eu Stage Iv, Japan 2014, Korea Tier 4 FinalCat C18 ACERTCat C18 ACERT
Chambre de compression
Number Of Belts6 laced6 laced
Belt Width7 in17.8 cm
Transmission
Forward - 13.8 mph6.2 km/h
Forward - 25 mph8.1 km/h
Forward - 37 mph11.3 km/h
Forward - 48.8 mph14.2 km/h
Forward - 511.6 mph18.7 km/h
Forward - 614.2 mph22.9 km/h
Forward - 719.6 mph31.6 km/h
Reverse - 14 mph6.5 km/h
Reverse - 29.1 mph14.7 km/h
Forward - 823.5 mph37.9 km/h
Forward - 934 mph54.8 km/h
Direction
Lock To Lock4.8 seconds @ 60 rpm4.8 seconds @ 60 rpm
Benne
Charge utile nominale99648.9 lb45200 kg
Système d'enrubannage
Twine TypeElectricElectric
Twine Ball Capacity44
Capacités de remplissage d'entretien
Système de refroidissement23.7 gal89.8 L
Réservoir de carburant145.3 gal550.1 L
Def Tank5.3 gal20.1 L
Final Drive - Each1.3 gal5 L
Engine Crankcase13.7 gal51.9 L
Brake Cooling Tank17.7 gal67 L
Steering/Hoist Hydraulic System36.9 gal139.7 L
Transmission - Otg19.8 gal75 L
Axles - Each15.8 gal59.9 L
Équipement de série
Cab - FopsISO 3449 Level II 2005ISO 3449 Level II 2005
Cab - RopsISO 3471 2008ISO 3471 2008
BrakesISO 3450 2011ISO 3450 2011
SteeringISO 5010 2007ISO 5010 2007
Poids en ordre de marche
Front Axle - Empty43515 lb19738.1 kg
Center Axle - Empty15309 lb6944.1 kg
Rear Axle - Empty14731 lb6681.9 kg
Total - Empty73553 lb33363.1 kg
Front Axle - Rated Load13007 lb5899.9 kg
Center Axle - Rated Load38691 lb17550 kg
Rear Axle - Rated Load38691 lb17550 kg
Total - Rated Load90390 lb41000.3 kg
Front Axle - Loaded56522 lb25638 kg
Center Axle - Loaded54000 lb24494 kg
Rear Axle - Loaded53422 lb24231.9 kg
Total - Loaded163942 lb74362.9 kg
Niveaux sonores
Interior Cab72 dB(A)72 dB(A)
Note (1)The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note (2)Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Cercle de braquage
NoteDimensions are for machines equipped with 29.5R25 tires.Dimensions are for machines equipped with 29.5R25 tires.
Turning Dimensions - Sae Turning Radius340 in8636 mm
Turning Dimensions - Clearance Radius356 in9042.4 mm
Turning Dimensions - Inside Radius174 in4419.6 mm
Turning Dimensions - Aisle Width233 in5918.2 mm
Capacités de la caisse
Heaped (Sae 2:1)32.7 yd325.1 m3
Struck24.2 yd318.6 m3
Tailgate Struck25.5 yd319.5 m3
Tailgate Heaped Sae 2:134.7 yd326.6 m3
Vérin de levage de la caisse
Lower (Manual)10 s10 s
Lower (Automatic)10 s10 s
Raise (Manual)12 s12 s
Raise (Automatic)13 s13 s
Body Plate
Body Plate TypeHigh Strength Brinell HB450 Wear Resistant SteelHigh Strength Brinell HB450 Wear Resistant Steel
Avant0.3 in7.2 mm
Chute0.6 in14 mm
Side0.5 in11 mm
Base0.6 in14 mm
Optimal Loader/Truck Pass Matching
NoteAn optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Hydraulic Excavator: 390 - Passes44
Hydraulic Excavator: 374 - Passes55
Wheel Loader: 982 - Passes44
Wheel Loader: 980 - Passes4-54-5
Wheel Loader: 972 - Passes4-54-5
Besoin de la machine, pas seulement des chiffres?
Trouvez-en une, évaluez-la ou publiez votre demande.
Spécifications publiées par le fabricant.